Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %*: Nitric acid | 7697-37-2 | 0.1 - 1; Hexafluorozirconic acid | 12021-95-3 | 0.1 - 1; * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nitric acid | 7697-37-2 | 0.1 - 1% | Yes |
| Hexafluorozirconic acid | 12021-95-3 | 0.1 - 1% | Yes |
Notes
Non hazardous components
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Symptoms: Irritation
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention for skin and eye contact.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn. Symptoms may not be readily apparent. Obtain medical attention.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT 2600 MU NON CHROME COATING known as ALODINE 2600 MAKEUP
---
BONDERITE M-CR 713 MU CHROMATE COATING known as ALODINE 713 MAKEUP
---
BONDERITE M-NT 8800 PART A CR FREE CONVERSION COATING known as ALODINE® SG PART A
---
BONDERITE M-NT 5700 CR FREE CONVERSION COATING known as ALODINE 5700
---
BONDERITE M-NT 802 N CONVERSION COATING known as ALODINE 802 N EC650=RWE
---
BONDERITE M-NT 404 CONVERSION COATING
---
BONDERITE M-NT 404 CONVERSION COATING
---
BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
None identified.
Avoid contact with organic materials, oils, greases, and any oxidizable materials. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. This product may react with strong alkalies.
May liberate hydrogen fluoride. Decomposes with heat to produce oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid, Fluorozirconic acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP?
The signal word is danger.
What is the physical form of BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP?
BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP is a liquid with colourless / colorless color. It has acidic odor.
What is the solubility of BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP?
Complete Water
What is BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP used for?
Conversion coating
What are the hazard statements for BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP?
This substance has 1 hazard statement:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-NT 4040 MU CONVERSION COATING known as ALODINE 4040 MAKEUP?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.