NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK 4181 L AERO known as TURCO 4181 L

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK 4181 L AERO known as TURCO 4181 L
Product Code
1683850

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Skin Corr. Cat. 1B
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 10 - 30% Yes
Diethanolamine 111-42-2 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air.

Skin contact

Flush with large amounts of water.

Eye contact

Rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek immediate medical attention (eyes). Get immediate medical attention (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Specific hazards

This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a moderate fire hazard.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel

Environmental

Prevent further leakage or spillage if safe to do so. Dike the spilled material, where this is possible. Ventilate area. Do not allow product to enter sewer or waterways.

Cleanup methods

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.

Materials: inert absorbent such as sand or vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Wash thoroughly after handling.

Storage

Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not applicable
Appearance
---
Solubility
Complete
Kinematic Viscosity
Not available.
Flash Point
Aqueous. Does not flash.
Decomposition Temperature
Not available.
State Under Standard Conditions
---
Dynamic Viscosity
Not available.
Vapor Density
---
Physical State
Liquid
Partition Coefficient
Not determined
Flammability
Not applicable
Voc Content
6.5 % (calculated)
Melting Point
Not determined
Solubility In Fat
---
Properties Status
---
Bulk Density
---
Density
---
Auto Ignition Temperature
Not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Odor Threshold
Not available.
Relative Evaporation Rate
---
Colour Intensity
---
Vapor Pressure
Not determined
Crystallisation Point
---
Physical State Data
liquid
Explosive Limits
---
Freezing Point
---
Ph
> 12.0
Relative Density
1.30 - 1.32 at 25 °C (77°F)
Metal Corrosion
---
Form
---
Boiling Point
> 212 °F (> 100°C)
Odor
Mild
Upper Explosive Limit
Not available.
Solubility In Water
---
Colour
Light yellow
Lower Explosive Limit
Not available.
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product reacts with acids.

Hazardous reactions

Will not occur.

Avoid

Avoid contact with acids.

Incompatible

Nitrites may react with organic amines to form nitrosamines which can cause cancer. Reaction with strong acids.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-AK 4181 L AERO known as TURCO 4181 L?

The signal word is danger.

What is the physical form of BONDERITE C-AK 4181 L AERO known as TURCO 4181 L?

BONDERITE C-AK 4181 L AERO known as TURCO 4181 L is a liquid with light yellow color. It has mild odor.

What is the solubility of BONDERITE C-AK 4181 L AERO known as TURCO 4181 L?

Complete

What is BONDERITE C-AK 4181 L AERO known as TURCO 4181 L used for?

Cleaner

What are the hazard statements for BONDERITE C-AK 4181 L AERO known as TURCO 4181 L?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK 4181 L AERO known as TURCO 4181 L?

The melting point is Not determined and the boiling point is > 212 °F (> 100°C).