NextSDS Logo
Safety Data Sheet EN

BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING
Synonyms
BONDERITE 1455 RTU

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION
H319 CAUSES SERIOUS EYE IRRITATION

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hexafluorotitanic acid 17439-11-1 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting.

Immediate Medical Attention

GET IMMEDIATE MEDICAL ATTENTION. Seek immediate medical attention.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Absorb spill with inert material. Shovel material into appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed. For industrial use only. Do not take internally.

Storage

Store between 40 °F (4.4 °C) and 100 °F (37.8 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
---
Colour Intensity
---
Solidification Point
---
Auto Ignition Temperature
Not applicable
Explosive Limits
---
Physical State Data
liquid
Voc Content
1.95 g/l EPA Method 24
Flammability
Not applicable
Solubility In Water
---
State Under Standard Conditions
---
Ph
2.6
Partition Coefficient
Not determined
Upper Explosive Limit
Not applicable
Softening Point
---
Lower Explosive Limit
Not applicable
Evaporation Rate
Not available.
Solubility In Fat
---
Vapor Density
---
Metal Corrosion
---
Bulk Density
---
Physical State
Liquid
Melting Point
Not determined
Flash Point
Not applicable
Odor
Mild
Kinematic Viscosity
Not available.
Dynamic Viscosity
Not available.
Odor Threshold
Not available.
Boiling Point
> 100 °C (> 212°F) calculated
Vapor Pressure
Not determined
Colour
Orange
Form
---
Relative Evaporation Rate
---
Crystallisation Point
---
Relative Density
1.00 - 1.03 at 25 °C (77°F)
Properties Status
---
Cloud Point
---
Molecular Weight
---
Decomposition Temperature
Not available.
Solubility
Complete
Freezing Point
---
Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.

Incompatible

Acids. Bases. Oxidizing agents. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING known by?

BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING is also known as: BONDERITE 1455 RTU

What is the hazard signal word for BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING?

The signal word is warning.

What is the physical form of BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING?

BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING is a liquid with orange color. It has mild odor.

What is the solubility of BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING?

Complete

What is BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING used for?

Conversion coating

What are the hazard statements for BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION
  • H319: CAUSES SERIOUS EYE IRRITATION

What is the melting point of BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.