Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®
- Product Form
- Silicone Sealant
- Product Code
- 231504
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Percentage*
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Substituted Polysiloxane | --- | 80 - 90% | Yes |
| Silica, amorphous, treated | 68909-20-6 | 5 - 10% | Yes |
| Trimethoxyvinylsilane | 2768-02-7 | 1 - 5% | Yes |
| 2,2-Diethoxyacetophenone | 6175-45-7 | 1 - 5% | Yes |
IDH number: 231504 Product name: LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours or decomposition products. If symptoms develop and persist, get medical attention.
Wipe off paste with paper towel or cloth. Wash with soap and water. If skin irritation persists, call a physician.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Prevent vomiting if possible. Get medical attention.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. If skin irritation persists, call a physician. Seek immediate medical attention for eye contact. Get medical attention for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Prevent inhalation of fumes and gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow material to contaminate ground water system.
Scrape up as much material as possible. Place scrap material in a well ventilated area and allow to cure to rubber.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Store in a dry area below 90° F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not available.
None under normal processing.
Product is sensitive to light and moisture.
Acids. Bases. Oxidizing agents. Heat, sunlight, or UV light.
Contact with water liberates methanol.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®?
The signal word is warning.
What is the physical form of LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®?
LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil® is a viscous, liquid with off white color. It has slight, alcoholic odor.
What are the hazard statements for LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE SI 198563 known as Loctit® 198563 Nuva-Sil®?
The melting point is Not available. and the boiling point is Not applicable.