Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC
- Product Code
- 1643310
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. If evacuation of stomach contents is necessary, use method least likely to cause aspiration. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Eliminate ignition sources including sources of electrical, static or frictional sparks. Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 800G
---
LOCTITE EDAG 30C-134 E&C known as ELECTRODAG30C-134
---
LOCTITE EDAG SA 76002 E&C known as ELECTRODAGSA76002
---
LOCTITE DAG 1050 E&C known as DAG 1050 5 KG
---
LOCTITE EDAG PD 054 E&C known as ELECTRODAGPD-054
---
LOCTITE EDAG 154 E&C known as ELECTRODAG154
---
LOCTITE EDAG PF 006 E&C known as ELECTRODAGPF-006
---
LOCTITE EDAG PF 021 150G E&C
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Store between 5.0 °C (41°F) and 30.0 °C (86°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Store in original container until ready to use. Keep out of reach of children and away from food and drink. Protect from direct sunlight.
Wash thoroughly after handling. Keep out of reach of children and away from food and drink.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Oxides of nitrogen. Irritating organic fragments.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC?
The signal word is danger.
What is the physical form of LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC?
LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC is a paste with black color. It has mild. amine odor.
What is the solubility of LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC?
Negligible Water
What is LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC used for?
Coating
What are the hazard statements for LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC?
This substance has 6 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE EDAG 33RO65A E&C known as ELECTRODAG 33RO65A, 4kg SPEC?
The melting point is Not determined and the boiling point is > 138.0 °C (> 280.4 °F).