NextSDS Logo
Safety Data Sheet EN

BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hexafluorozirconic acid 12021-95-3 1 - 5% Yes
Cupric nitrate 3251-23-8 1 - 5% Yes
Nitric acid 7697-37-2 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. Gloves should be worn when applying the gel to prevent transfer of HF and secondary burns. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only. Use only with adequate ventilation.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not available.
Vapor Density
---
Bulk Density
---
Cloud Point
---
Ph
< 2
Boiling Point
Not determined
State Under Standard Conditions
---
Relative Density
1.01 - 1.05 at 60 °F (15.56 °C)
Flammability
Not applicable
Vapor Pressure
Not determined
Form
---
Odor Threshold
Not available.
Upper Explosive Limit
Not available.
Molecular Weight
---
Freezing Point
---
Auto Ignition Temperature
Not applicable
Solubility
Completely soluble Water
Colour Intensity
---
Appearance
---
Odor
Sour/Acid
Melting Point
Not determined
Solubility In Fat
---
Colour
Blue
Physical State
Liquid
Crystallisation Point
---
Solidification Point
---
Physical State Data
liquid
Partition Coefficient
Not determined
Decomposition Temperature
Not available.
Explosive Limits
---
Properties Status
---
Voc Content
0 %
Solubility In Water
---
Relative Evaporation Rate
---
Flash Point
Not applicable
Softening Point
---
Kinematic Viscosity
Not available.
Dynamic Viscosity
Not available.
Metal Corrosion
---
Density
---
Evaporation Rate
Not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product may react with strong alkalies.

Hazardous reactions

None under normal processing.

Avoid

Store away from incompatible materials.

Incompatible

Strong alkalis.

Decomposition

May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1?

The signal word is danger.

What is the physical form of BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1?

BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1 is a liquid with blue color. It has sour/acid odor.

What is the solubility of BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1?

Completely soluble Water

What is BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1 used for?

Conversion coating

What are the hazard statements for BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1?

This substance has 1 hazard statement:

  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE M-NT 1820 R1 CONVERSION COATING known as BONDERITE M-NT 1820 R1?

The melting point is Not determined and the boiling point is Not determined.