NextSDS Logo
Safety Data Sheet EN

LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER
Product Code
38408

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Mold Release

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
STOT SE Cat. 3
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOUR.
H304 MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
H315 CAUSES SKIN IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P310 IF SWALLOWED: Immediately call a physician or poison control center.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C7-C9, isoalkanes 1174921-67-5 80 - 100% Yes
Hydrocarbons, C10-C12, isoalkanes, <2% aromatics 65072-03-9 10 - 30% Yes
Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics 64742-48-9 1 - 5% Yes

Notes

*Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Check for and remove any contact lenses. Get immediate medical attention.

Ingestion

Do not induce vomiting; contains petroleum distillates and/or aromatic solvents. Never give anything by mouth to an unconscious person. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Get immediate medical attention.

Immediate Medical Attention

Get medical attention for inhalation, eye contact, and ingestion.

Medical Treatment

This material is an aspiration hazard. Potential danger from aspiration must be weighed against possible oral toxicity when deciding whether to induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Do not use high volume water jet.

Specific hazards

Vapors may form explosive mixtures with air. Do not handle or store near an open flame, heat or other sources of ignition. Hydrocarbon solvents are basically non-conductors of electricity and can become electrostatically charged during mixing, filtering or pumping at high flow rates. If this charge reaches a significantly high level, sparks can form that may ignite vapors of flammable liquids.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Water may be unsuitable as an extinguishing media, but may be helpful in keeping adjacent containers cool. Keep personnel upwind of fire.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed metal container until ready for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.

Storage

store at or below 48.8 °C (119.8 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use explosion-proof mechanical ventilation and local exhaust to control contaminants to within their occupational exposure limits during the use of this product.

Hands

Use chemical resistant, impermeable gloves.

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Respiratory

Use a NIOSH approved supplied air respirator with an organic cartridge if the potential to exceed established exposure limits exists.

Skin/Body

Use chemical resistant, impermeable clothing including an apron or body suit to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
---
Partition Coefficient
Not available.
Lower Explosive Limit
0.6 % The product is not explosive. The formation of explosive vapor/air mixtures is possible.
State Under Standard Conditions
---
Colour
Colourless / Colorless
Decomposition Temperature
Not available.
Freezing Point
---
Crystallisation Point
---
Vapor Pressure
12 mbar (20 °C (68°F))
Solubility In Water
---
Form
---
Vapor Density
---
Softening Point
---
Auto Ignition Temperature
The substance or mixture is not classified as pyrophoric.
Bulk Density
---
Evaporation Rate
Slower than ether.
Colour Intensity
---
Odor
Solvent, Mild
Flammability
Flammable liquid
Physical State
liquid
Metal Corrosion
---
Kinematic Viscosity
0.72 mm2/s
Flash Point
6 °C (42.8 °F) Tagliabue closed cup
Upper Explosive Limit
7 % The product is not explosive. The formation of explosive vapor/air mixtures is possible.
Density
0.725
Solubility
Slight Water; Soluble other organic solvents
Relative Density
0.725
Voc Content
99.8 %; 724 g/l
Cloud Point
---
Relative Evaporation Rate
---
Solidification Point
---
Properties Status
---
Solubility In Fat
---
Odor Threshold
Not available.
Dynamic Viscosity
Not available.
Ph
Not applicable, Product is non-polar/aprotic.
Melting Point
Not applicable, Product is a liquid
Explosive Limits
---
Molecular Weight
---
Physical State Data
liquid
Boiling Point
> 112 °C (> 233.6 °F) 1,013 hPa
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Avoid static discharge. Vapors may form explosive mixtures with air. Spray mist may be flammable at temperatures below the flash point. Keep away from open flames, hot surfaces and sources of ignition. Exposure to air or moisture over prolonged periods. Fire or intense heat may cause violent rupture of packages.

Incompatible

Strong oxidizing agents. Humid air. Water.

Decomposition

Oxides of carbon. Hydrocarbons. Irritating organic vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1866
Shipping Name
Resin solution
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER?

The signal word is danger.

What is the physical form of LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER?

LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER is a liquid with colourless / colorless color. It has solvent, mild odor.

What is the solubility of LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER?

Slight Water; Soluble other organic solvents

What is LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER used for?

Mold Release

What are the hazard statements for LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER?

This substance has 4 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
  • H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
  • H315: CAUSES SKIN IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of LOCTITE FREKOTE SOLO known as FREKOTE® SOLO® RELEASING INTER?

The melting point is Not applicable, Product is a liquid and the boiling point is > 112 °C (> 233.6 °F) 1,013 hPa.