Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AC M Known as FIXODINE M
- Product Code
- 1357334
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for the conversion treatment of metals
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetrasodium pyrophosphate | 7722-88-5 | 30 - 60% | Yes |
| Manganese hydrogen phosphate | 51349-94-1 | 30 - 60% | Yes |
Non hazardous components Actual concentration or concentration range is withheld as a trade secret
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
Not a fire hazard. Formation of toxic gases is possible during heating or in fires.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate personal protective equipment. Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing dust. For industrial use only.
Keep the container tightly closed and in a cool, well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
This product reacts with acids.
None expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AC M Known as FIXODINE M?
The signal word is danger.
What is the physical form of BONDERITE M-AC M Known as FIXODINE M?
BONDERITE M-AC M Known as FIXODINE M is a solid with white color. It has odorless odor.
What is the solubility of BONDERITE M-AC M Known as FIXODINE M?
Partially soluble Water
What is BONDERITE M-AC M Known as FIXODINE M used for?
Product for the conversion treatment of metals
What are the hazard statements for BONDERITE M-AC M Known as FIXODINE M?
This substance has 2 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-AC M Known as FIXODINE M?
The melting point is > 100 °C (> 212°F) and the boiling point is > 100 °C (> 212°F).