Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Maxiclene 400ml Aerosol
- Product Form
- Aerosol
- Product Code
- AMXL400, ZA
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- SEJ0-20T3-100A-CVY1
Identified Uses
Cleaning agent
Uses advised against
No specific uses advised against are identified
Manufacturers & Suppliers
AF INTERNATIONAL / MacDermid Alpha Electronics Solutions
manufacturer
ASHBY PARK, COALFIELD WAY, ASHBY de la ZOUCH, LEICESTERSHIRE. LE65 1JR, UNITED KINGDOM
+44 (0) 1530 419600
HK WENTWORTH LIMITED
distributor
32 RUE DE TOURNENFILS, 91540 MENNECY, FRANCE
+33 (0) 1 82 88 47 94
Emergency Contacts
POISON INFORMATION CENTRE (Beaumont Hospital, Republic of Ireland only)
+353 (0)1 809 2166
08:00 - 22:00
Carechem 24
+44 1865 407333
24hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol EC: 200-578-6 | 64-17-5 | 0.1% | Yes |
| Petroleum gases, liquefied EC: 270-704-2 | 68476-85-7 | 1 - 5% | Yes |
| 2-Butoxyethanol EC: 203-905-0 | 111-76-2 | 1 - 5% | Yes |
| Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 926-141-6 | 64742-47-8 | 1 - 5% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 0.1 - 1% | Yes |
| 2-Aminoethanol EC: 205-483-3 | 141-43-5 | 0.1 - 1% | Yes |
| Sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area. Get medical attention if irritation develops and persists.
Symptoms: Redness and tearing of the eyes.
Rinse mouth. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a doctor.
Immediate Medical Attention
Get medical attention immediately if symptoms occur. Get medical attention if irritation develops and persists. Call a doctor.
Medical Treatment
Note to doctors: Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not scatter spilled material with high pressure water streams.
No information available.
Large Fire: CAUTION: Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal protective equipment as required.
Prevent further leakage or spillage if safe to do so.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash it before reuse.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product. Avoid contact with skin, eyes or clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear suitable gloves. Impervious gloves.
If splashes are likely to occur, wear safety glasses with side-shields.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
None known based on information supplied.
Strong acids. Strong bases. Strong oxidising agents.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, FLAMMABLE
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Maxiclene 400ml Aerosol?
The signal word is danger.
What is the physical form of Maxiclene 400ml Aerosol?
Maxiclene 400ml Aerosol is a aerosol appearing as aerosol liquid with white color. It has characteristic. odor.
What is the solubility of Maxiclene 400ml Aerosol?
No data available
What is Maxiclene 400ml Aerosol used for?
Cleaning agent
What are the hazard statements for Maxiclene 400ml Aerosol?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol
- H229: Pressurised container: May burst if heated
What is the melting point of Maxiclene 400ml Aerosol?
The melting point is No data available and the boiling point is No data available.