Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Multi Spray 1000 500 ml
- Product Form
- Mixture
- Product Code
- 03.1118.9999
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Highly water-repellent spray for e.g. locks, tools, ignition systems, batteries and electrical connections.
Manufacturers & Suppliers
PCS Innotec International NV
manufacturer
Schans 4, BE - 2480 Dessel
+32 (0) 14 32 60 01
Innotec Supplies Ltd.
distributor
Unit 25 Glenmore Business Park, Telford RD, UK - SP2 7GL Salisbury, Wiltshire
+44 (0)1722411744
Emergency Contacts
BIG
+32 (0) 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics (Note P) EC: 919-857-5 | 64742-48-9 | 25 - 50% | Yes |
| Butane (Contains < 0,1% butadiene (203-450-8)) EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 2.5 - 10% | Yes |
| Isobutane (Contains < 0,1% butadiene (203-450-8)) EC: 200-857-2 | 75-28-5 | 1 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: May cause drowsiness or dizziness.
The product is not considered to be irritating to the skin.
Symptoms: Repeated exposure may cause skin dryness or cracking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder. Water spray. Alcohol resistant foam. Carbon dioxide.
Do not use a heavy water stream.
Extremely flammable aerosol. May form flammable/explosive vapour-air mixture.
Prevent fire fighting water from entering the environment. Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using this product. Use personal protective equipment as required. Provide good ventilation in process area to prevent formation of vapour. Take precautionary measures against static discharge. Eliminate all ignition sources if safe to do so. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Pressurised container.
Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50°C.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product.
Take precautionary measures against static discharge. Eliminate all ignition sources if safe to do so. Do not spray on a naked flame or any incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Where hand contact with the product may occur, the use of gloves (approved according to the EN374 standard) made from the following materials may provide suitable chemical protection: Nitrile rubber. For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for >480 minutes. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering this level of protection may not be available. In this case a lower breakthrough time may be acceptable as long as appropriate glove maintenance and replacement regimes are rigorously followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. Depending on model and material, glove thickness generally should be greater than 0,35 mm. Suitability and durability of a glove is dependent on usage (= frequency and duration of contact), chemical resistance of glove material, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced.
Wear security glasses which protect from splashes. ISO 16321-1
Wear appropriate breathing apparatus if air renewal not sufficient to maintain dust/vapour under TLV. Recommended: filter type AX/P2
Wear suitable protective clothing. EN 13034
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Extremely flammable aerosol. In use, may form flammable/explosive vapour-air mixture.
No additional information available
No additional information available
No additional information available
No additional information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is not classified as hazardous to the aquatic environment (acute or chronic) based on available data.
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Voor dit product zijn de ecotoxicologische gegevens slechts gedeeltelijk bekend. De informatie is gebaseerd op kennis van de componenten en de ecotoxicologie van soortgelijke producten.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Avoid release to the environment. Should not be landfilled with household waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS, flammable
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Multi Spray 1000 500 ml?
The signal word is danger.
What is the physical form of Multi Spray 1000 500 ml?
Multi Spray 1000 500 ml is a liquid appearing as aerosol. with yellow-brown. color. It has characteristic. odor.
What is the solubility of Multi Spray 1000 500 ml?
Water: Practically not miscible
What is Multi Spray 1000 500 ml used for?
Highly water-repellent spray for e.g. locks, tools, ignition systems, batteries and electrical connections.
What are the hazard statements for Multi Spray 1000 500 ml?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
What is the melting point of Multi Spray 1000 500 ml?
The melting point is Not available and the boiling point is Not applicable, since the product is an aerosol..