Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Henkel New Zealand Ltd
manufacturer
2 Allens Rd East Tamaki Auckland, 2013 New Zealand
+64 (9) 272-6710
Emergency Contacts
24 HOUR EMERGENCY CONTACT NUMBER
0800 243 622
24 HOUR
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butane | 106-97-8 | 50 - 70% | No |
| Naphtha (petroleum), hydrotreated light, < 0.1 % benzene | 64742-49-0 | 10 - 20% | No |
| White mineral oil (petroleum) | 8042-47-5 | 1 - 10% | No |
| Non-hazardous ingredients~ | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Rinse with running water and soap. If symptoms develop and persist, get medical attention.
If irritation develops, flush eyes immediately with large amounts of water. If irritation persists, seek medical attention or advice.
Symptoms: irritation
Do not induce vomiting. Have victim rinse mouth thoroughly with water. Seek medical advice.
Immediate Medical Attention
Seek medical advice or get medical attention if symptoms develop and persist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Fine water spray, Foam, dry chemical or carbon dioxide.
WARNING FLAMMABLE! Vapors are heavier than air and may travel along the ground or be moved by ventilation and subsequently ignited by heat, pilot lights or other ignition sources at locations distant from the material handling point. Exposure to temperatures above 49°C (120°F) may cause container to burst. Containers may explode.
Cool aerosol containers with jet of water.
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA). Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not empty into drains / surface water / ground water.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU
---
LOCTITE LB 8040 PENETRATING OIL known as LOCTITE® FREEZE & RELEASE Part
---
LOCTITE LB 8018
---
LOCTITE LB 8031
---
LOCTITE LB 8009
---
LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD
---
LOCTITE LB 8150 known as Loctite 8150 500g EGFD
---
LOCTITE SF 7387 known as LOCTITE 330 DEPEND 25ML PT B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Wear suitable protective clothing, safety glasses and gloves. Keep away from heat, spark and flame.
Store in a cool, dry, well-ventilated area. Keep away from heat and direct sunlight. Do not store or use near heat, spark, open flame or other sources of ignition. Store below 120°F (50°C).
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Will not occur.
Stable under normal conditions of storage and use.
Incompatible with oxidising agents. Nitric acid. Chlorine.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. carbon monoxide carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU?
The signal word is danger.
What is the physical form of LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU?
LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU is a aerosol, liquid appearing as aerosol, liquid . It has petroleum odor.
What is LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU used for?
Lubricant
What are the hazard statements for LOCTITE LB 8040 FREEZE & RELEASE known as LOCTITE FREEZE&RELEASE 310G AU?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.