Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD
- Product Code
- 498501, FP4322-V25
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Encapsulant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, amorphous, naturally | 60676-86-0 | 60 - 80% | No |
| hexahydromethylphthalic anhydride | 25550-51-0 | 10 - 30% | No |
| Epoxy resin | --- | 5 - 10% | No |
| 7-Oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate | 2386-87-0 | 5 - 10% | No |
| Substituted phthalic anhydride | 34090-76-1 | 1 - 5% | No |
| benzene-1,2,4-tricarboxylic acid 1,2-anhydride | 552-30-7 | 0.1 - 1% | No |
| Toluene | 108-88-3 | 0.1 - 1% | No |
| Limestone | 1317-65-3 | 0.1 - 1% | No |
| Epoxy resin | --- | 0.1 - 1% | No |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | No |
| Imidazole salt | --- | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse.
Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Give a conscious person several glasses of water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Direct water stream
Violent steam generation may occur upon application of direct water stream. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Remove the absorbed material, and place in an appropriate chemical waste container for disposal.
Materials: Inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ECCOBOND FP0097 30CC
---
LOCTITE ECCOBOND FP4526 30CC
---
LOCTITE ECCOBOND FP4549 30CC
---
LOCTITE ECCOBOND FP4660 known as HYSOL 30cc LOW CTE GLB AMK - 40C
---
LOCTITE ECCOBOND FP4450 known as 10CC SEMI ENCAP ROCKWELL - 40CD
---
LOCTITE ECCOBOND FP4655 30CC
---
LOCTITE ECCOBOND EO1060 known as HYSOL EO1060 30CC ONE COMP -40C
---
LOCTITE ECCOBOND FP4650 30ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition. Exposure to moisture. Elevated temperatures.
Oxidizing agents. Acids and bases. Alcohols. Water. Amines.
Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Phenolics. Hydrogen cyanide. Styrene. Acrylonitrile. Acrolein. Aldehydes. Acetophenone. 4-Vinyl cyclohexene. Hydrocarbons. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD?
The signal word is danger.
What is the physical form of LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD?
LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD is a liquid, highly viscous with black color. It has mild odor.
What is LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD used for?
Encapsulant
What are the hazard statements for LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD?
This substance has 7 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ECCOBOND FP4322 known as 30CC PREMIX FROZE SEMICON - 40CD?
The melting point is Not available. and the boiling point is Not available..