Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer RLT plus
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Manufacturers & Suppliers
QIAGEN GmbH
manufacturer
QIAGEN Str. 1, D-40724 Hilden
+49-02103-29-0
QIAGEN Inc.
distributor
19300 Germantown Road, Germantown, MD 20874, USA
800-426-8157
http://support.qiagen.com
Emergency Contacts
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses. Protect unharmed eye.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
If accidentally swallowed obtain immediate medical attention. Rinse mouth with water. Never give anything by mouth to an unconscious person.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Exposure to decomposition products may be a hazard to health.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapors/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Material: Protective gloves. Remarks: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems. Do not wear contact lenses.
Choose body protection according to the amount and concentration of the dangerous substance at the work place. acid-resistant protective clothing. Footwear protecting against chemicals.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
Stable under recommended storage conditions. Hazardous decomposition products formed under fire conditions. Thiocyanates can develop poisonous gas in contact with strong acids. Keep away from oxidizing agents, and acidic or alkaline products.
No data available
No data available
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Buffer RLT plus?
The signal word is danger.
What is the physical form of Buffer RLT plus?
Buffer RLT plus is a liquid appearing as liquid with no data available color. It has characteristic odor.
What is Buffer RLT plus used for?
Laboratory chemicals
What are the hazard statements for Buffer RLT plus?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Buffer RLT plus?
The melting point is No data available and the boiling point is No data available.