NextSDS Logo
Safety Data Sheet EN

Buffer DLB

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Buffer DLB

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals

Manufacturers & Suppliers

Q

QIAGEN GmbH

manufacturer

QIAGEN Str. 1, D-40724 Hilden

+49-02103-29-0

QIAGEN Inc. logo

QIAGEN Inc.

19300 Germantown Road, Germantown, MD 20874, USA

800-426-8157

http://support.qiagen.com

Emergency Contacts

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Acute Tox. Cat. 4
Skin Corr. Cat. 1A
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 May be corrosive to metals.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P260 Do not breathe dusts or mists.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Substance name : Buffer DLB

Chemical Name CAS Number Concentration Hazardous
potassium hydroxide 1310-58-3 70 - 90% Yes
EDTA 60-00-4 10 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Immediate medical treatment is necessary.

Symptoms: Corrosion of the skin.

Eye contact

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses. Protect unharmed eye.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Ingestion

If accidentally swallowed obtain immediate medical attention. Rinse mouth with water. Never give anything by mouth to an unconscious person.

Symptoms: Harmful if swallowed.

Immediate Medical Attention

If accidentally swallowed obtain immediate medical attention. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards

Do not allow run-off from fire fighting to enter drains or water courses. Exposure to decomposition products may be a hazard to health.

Instructions

In the event of fire and/or explosion do not breathe fumes.

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing dust. Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.

Environmental

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Use mechanical handling equipment.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid formation of respirable particles. Do not breathe vapors/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Storage

Keep container tightly closed in a dry and well-ventilated place.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
---
Relative Evaporation Rate
---
Softening Point
---
Molecular Weight
---
Cloud Point
---
Crystallisation Point
---
Voc Content
---
Ph
14
Solubility In Fat
---
Decomposition Temperature
No data available
Form
lyophilized
Lower Explosive Limit
No data available
Bulk Density
---
Auto Ignition Temperature
No data available
Solidification Point
---
Solubility In Water
soluble
Physical State Data
solid
Freezing Point
---
Relative Density
No data available
Melting Point
No data available
State Under Standard Conditions
---
Colour
white
Physical State
solid
Vapor Pressure
No data available
Evaporation Rate
---
Kinematic Viscosity
No data available
Partition Coefficient
No data available
Upper Explosive Limit
No data available
Explosive Limits
---
Appearance
(lyophilized)
Solubility
---
Metal Corrosion
---
Vapor Density
---
Dynamic Viscosity
No data available
Boiling Point
No data available
Colour Intensity
---
Properties Status
---
Odor Threshold
No data available
Odor
characteristic
Flash Point
No data available
Density
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if stored and applied as directed.

Reactivity

No decomposition if stored and applied as directed.

Hazardous reactions

Stable under recommended storage conditions. Hazardous decomposition products formed under fire conditions. Keep away from oxidizing agents, and acidic or alkaline products.

Avoid

No data available

Incompatible

Strong oxidizing agents

Decomposition

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1813
Shipping Name
Potassium hydroxide, solid (Potassium hydroxide)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Buffer DLB?

The signal word is danger.

What is the physical form of Buffer DLB?

Buffer DLB is a solid appearing as (lyophilized) with white color. It has characteristic odor.

What is Buffer DLB used for?

Laboratory chemicals

What are the hazard statements for Buffer DLB?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Buffer DLB?

The melting point is No data available and the boiling point is No data available.