Iodine 99.999 Suprapur®

After inhalation: fresh air. If breathing stops: mouth-to-mouth breathing or artificial respiration. Oxygen if necessary. Immediately call in physician.

Symptoms: Asthma, bronchitis, rhinitis

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.

Symptoms: Dermatitis, Skin disorders

After eye contact: rinse out with plenty of water. Call in ophthalmologist.

Symptoms: conjunctivitis

After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Symptoms: bloody diarrhoea, metallic taste

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up dry. Clean up affected area.

Observe label precautions. Work under hood. Do not inhale substance/mixture.

Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Safety glasses

required when dusts are generated. Recommended Filter type: Filter B-(P2) The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

sublimable

See section 10.3

Risk of explosion with: Reducing agents, Alkali metals, Acetylene, Ammonia, Potassium, copper compounds, sodium, oxyhalogenic compounds, Boron, halogen oxides, iodides, azides, ammonium compounds, antimony, in powder form, mercury oxide, with, Methanol, and, ethanol. Risk of ignition or formation of inflammable gases or vapours with: Powdered metals, Zinc, semimetals, halogen-halogen compounds, nonmetals, nonmetallic oxides, alkali salts, Iron, Fluorine, formaldehyde, hydrides, sodium phosphite, phosphorus, sulfur, Titanium, powdered aluminium, acetylcholine, combustible substances, powdered magnesium, petrol, butadiene, CALCIUM HYDRIDE, Diethylether, with, Aluminium. Exothermic reaction with: carbides, azides, turpentine oils and/or turpentine substitutes, alkali oxides, lithium silicide, alkaline earth compounds, nitrides, Acetaldehyde, Lithium, fluorides, Oxides of phosphorus, Chlorine, Iron, in powder form

no information available

no information available

in the event of fire: See section 5.