K-FLEX K-467

Remove victim to fresh air, away from the accident scene. In the event of respiratory symptoms (coughing, wheezing, breathing difficulty, asthma) keep the victim in a comfortable position for breathing. If necessary administer oxygen. If the subject stops breathing, administer artificial respiration. Get medical advice/attention.

Symptoms: coughing, wheezing, breathing difficulty, asthma

Take off contaminated clothing. Wash immediately and thoroughly with running water (and soap if possible). Get medical advice. Avoid further contact with contaminated clothing.

Remove, if present, contact lenses if the situation allows you to do so easily. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. Get medical advice/attention.

Do not induce vomiting unless explicitly authorised by a doctor. Do not give anything by mouth to an unconscious person. Get medical advice/attention.

carbon dioxide, foam, chemical powder. For product loss or leakage that has not caught fire, water spray can be used to disperse flammable vapours and protect those trying to stem the leak.

Do not use jets of water.

Excess pressure may form in containers exposed to fire at a risk of explosion. Do not breathe combustion products.

Water is not effective for putting out fires but can be used to cool containers exposed to flames to prevent explosions.

Block the leakage if there is no hazard. Send away individuals who are not suitably equipped.

The product must not penetrate into the sewer system or come into contact with surface water or ground water.

Collect the leaked product into a suitable container. Absorb the remainder with inert absorbent material.

Materials: inert absorbent material

Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Avoid bunching of electrostatic charges. When performing transfer operations involving large containers, connect to an earthing system and wear antistatic footwear. Never use compressed air when handling. Open containers with caution as they may be pressurised. Do not eat, drink or smoke during use.

Store only in the original container. Store the containers sealed, in a well ventilated place, away from direct sunlight. Store in a cool and well ventilated place, keep far away from sources of heat, naked flames and sparks and other sources of ignition.

Do not eat, drink or smoke during use.

Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Without adequate ventilation, vapours may accumulate at ground level and, if ignited, catch fire even at a distance, with the danger of backfire.

As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is well aired through effective local aspiration.

Protect hands with category III work gloves. The following should be considered when choosing work glove material (see standard EN 374): compatibility, degradation, permeability time. The work gloves' resistance to chemical agents should be checked before use, as it can be unpredictable. The gloves' wear time depends on the duration and type of use.

Wear airtight protective goggles (see standard EN ISO 16321).

Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold values considered. Use a mask with a type A filter whose class (1, 2 or 3) must be chosen according to the limit of use concentration. (see standard EN 14387). If the substance considered is odourless or its olfactory threshold is higher than the corresponding TLV-TWA and in the case of an emergency, wear open-circuit compressed air breathing apparatus (in compliance with standard EN 137) or external air-intake breathing apparatus (in compliance with standard EN 138). For a correct choice of respiratory protection device, see standard EN 529.

Wear category I professional long-sleeved overalls and safety footwear (see Regulation 2016/425 and standard EN ISO 20344). Wash body with soap and water after removing protective clothing. Consider the appropriateness of providing antistatic clothing in the case of working environments in which there is a risk of explosion.

The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards. Product residues must not be indiscriminately disposed of with waste water or by dumping in waterways. For information on controlling environmental exposure, see the exposure scenarios attached to this safety datasheet

The product is stable in normal conditions of use and storage.

There are no particular risks of reaction with other substances in normal conditions of use.

Formaldehyde: Aqueous solutions are stabilised with methanol but tend to polymerise over time.

Formaldehyde: heat. Acetone: heat. Ethyl Acetate: light, air and water.

Formaldehyde: acids, alkalis, ammonia, tannin, strong oxidants, phenoles, copper salts, silver, iron. K-FLEX K-467 ADHESIVE: acids, oxidising substances. Ethyl Acetate: acids, bases, strong oxidants, chlorosulphuric acid.

Formaldehyde: Decomposes under the effect of heat. Acetone: Decomposes under the effect of heat. Ethyl Acetate: Decomposes slowly into acetic acid and ethanol.