CS600 PercoTop® Thinner Standard

Avoid inhalation of vapour or mist. Move to fresh air in case of accidental inhalation of vapours. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

Symptoms: May cause nose and throat irritation. May cause nervous system depression characterized by the following progressive steps: headache, dizziness, nausea, staggering gait, confusion, unconsciousness. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage.

Do NOT use solvents or thinners. Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognized skin cleanser. If skin irritation persists, call a physician.

Symptoms: Repeated or prolonged liquid contact may cause skin irritation with discomfort and dermatitis.

Remove contact lenses. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Seek medical advice.

Symptoms: May cause irritation or burning of the eyes.

If swallowed, seek medical advice immediately and show this safety data sheet (SDS) or product label. Do NOT induce vomiting. Keep at rest.

Symptoms: May result in gastrointestinal distress.

Universal aqueous film-forming foam, Carbon dioxide (CO2), Dry chemical

High volume water jet

Flammable liquid. Vapor/air mixture will burn when an ignition source is present.

In the event of fire, cool tanks with water spray.

Keep in a well-ventilated place. Keep away from sources of ignition. Comply with safety directives (see chapters 7 and 8). Do not inhale vapours.

Do not let product enter drains. Notify the respective authorities in accordance with local law in the case of contamination of rivers, lakes or waste water systems.

Clean preferably with a detergent; avoid use of solvents.

Avoid skin and eye contact. Do not breathe vapours or spray mist. Smoking, eating and drinking should be prohibited in the application area. Operators should wear antistatic footwear and clothing.

+5 to +35°C. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorized access. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Smoking, eating and drinking should be prohibited in the application area.

Solvent vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Never use pressure to empty container: container is not a pressure vessel.

Provide adequate ventilation. This should be achieved by a good general extraction and -if practically feasible- by the use of a local exhaust ventilation. During spray operations, use spray booth fitted to airflow requirements of AS/NZS 4114.

If these are not sufficient to maintain concentrations of particulates and solvent vapour below the OEL, suitable respiratory protection must be worn.

Stable

Sensitivity to Static Discharge: Solvent vapors in air may explode if static grounding and bonding is not used during transfer of this product. Sensitivity to Mechanical Impact: None known.

Will not occur.

Stable under recommended storage and handling conditions (see section 7).

Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.

When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen.