NextSDS Logo
Safety Data Sheet EN

COPPER GREASE

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
COPPER GREASE
Product Code
XCG020, XCG070, XCG500, YGC003, XCG000, QHC500, CCG070

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

T

TETROSYL LIMITED

manufacturer

Bury, Lancashire, England, BL9 7NY

0161 764 5981

Emergency Contacts

Emergency Contact

0161 764 5981

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS09 - Environmental hazard

GHS09

Hazard Statements

H400 Very toxic to aquatic life.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P273 Avoid release to the environment.
P391 Collect spillage.
P501 Dispose of contents/ container in accordance with national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
COPPER EC: 231-159-6 7440-50-8 --- No

Notes

No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Get medical attention if any discomfort continues.

Symptoms: May cause an asthma-like shortness of breath. Vapours may cause headache, fatigue, dizziness and nausea.

Skin contact

Remove contaminated clothing immediately and wash skin with soap and water.

Symptoms: Prolonged or repeated contact with skin may cause irritation, redness and dermatitis. Allergic rash.

Eye contact

Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Do not rub eye.

Symptoms: May cause temporary eye irritation.

Ingestion

Consult a physician for specific advice.

Symptoms: May cause discomfort if swallowed. May cause stomach pain or vomiting. May cause nausea, headache, dizziness and intoxication.

Immediate Medical Attention

If in doubt, get medical attention promptly.

Medical Treatment

No specific recommendations.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire-extinguishing media suitable for the surrounding fire.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2). No unusual fire or explosion hazards noted.

Instructions

No specific firefighting precautions known.

Firefighter Protection

Leave danger zone immediately.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of spills, beware of slippery floors and surfaces.

Environmental

Collect and dispose of spillage as indicated in Section 13.

Cleanup methods

Absorb spillage with non-combustible, absorbent material.

Materials: non-combustible, absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes.

Storage

Keep containers upright. Store in tightly-closed, original container.

Hygiene

Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site. Do not eat, drink or smoke when using the product. Always remove oil with soap and water or skin cleaning agent, never use organic solvents. Do not use oil-contaminated clothing or shoes, and do not put rags moistened with oil into pockets.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Avoid inhalation of vapours. Observe any occupational exposure limits for the product or ingredients.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. It is recommended that gloves are made of the following material: Nitrile rubber. It should be noted that liquid may penetrate the gloves. Frequent changes are recommended.

Eyes

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Tight-fitting safety glasses.

Respiratory

No specific recommendations.

Skin/Body

Wear suitable protective clothing as protection against splashing or contamination.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Grease
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Grease.
Colour
Brownish.
Colour Intensity
---
Form
---
Odor
Oil-like.
Odor Threshold
---
Ph
---
Melting Point
Not determined.
Boiling Point
>100°C @
Flash Point
>100°C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
0.966g/cm @ 20°C
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Insoluble in water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No particular stability concerns.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

Not applicable.

Avoid

There are no known conditions that are likely to result in a hazardous situation.

Incompatible

No specific material or group of materials is likely to react with the product to produce a hazardous situation.

Decomposition

Does not decompose when used and stored as recommended.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Acute toxicity - fish Not available. Acute toxicity - aquatic invertebrates Not available.

12.2. Persistence and degradability

Persistence and degradability There are no data on the degradability of this product.

There are no data on the degradability of this product.

12.3. Bioaccumulative potential

Bioaccumulative potential No data available on bioaccumulation. Partition coefficient Not determined.

No data available on bioaccumulation. Partition coefficient not determined.

12.4. Mobility in soil

Adsorption/desorption coefficient Not available.

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB assessment This substance is not classified as PBT or vPvB according to current EU criteria.

The substance is not classified as PBT or vPvB according to current EU criteria.

12.6. Other adverse effects

Other adverse effects Not available.

Not available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority. Absorb in vermiculite, dry sand or earth and place into containers. Dispose of waste via a licensed waste disposal contractor.

Disposal

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS COPPER)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for COPPER GREASE?

The signal word is warning.

What is the physical form of COPPER GREASE?

COPPER GREASE is a grease appearing as grease. with brownish. color. It has oil-like. odor.

What are the hazard statements for COPPER GREASE?

This substance has 2 hazard statements:

  • H400: Very toxic to aquatic life.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of COPPER GREASE?

The melting point is Not determined. and the boiling point is >100°C @.