Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLAGCOL TF1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Contact adhesive
Manufacturers & Suppliers
Soprema
Bouwelven 5, 2280 GROBBENDONK
+32 (0) 14.23.07.07
Emergency Contacts
Belgian poison control centre
00 32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone; propan-2-one; propanone EC: 200-662-2 | 67-64-1 | 10 - 15% | Yes |
| cyclohexane Annex1 EC: 203-806-2 | 110-82-7 | 20 - 35% | Yes |
| Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha EC: 265-151-9 | 64742-49-0 | 20 - 35% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air - In case of respiratory collapse: apply mouth-to-mouth resuscitation - When there is no quick recovery : consult a doctor/medical service
Rinse immediately with plenty of water - Wash with water and soap - In all cases of doubt, or when symptoms persist, seek medical attention - Repeated or prolonged contact with the product may cause skin diseases.
Symptoms: skin irritation - Dry skin
Rinse immediately with plenty of water - Take victim to a doctor if irritation persists
Do not induce vomiting - When there is no quick recovery : consult a doctor/medical service
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention - When there is no quick recovery : consult a doctor/medical service
Medical Treatment
Causes damage to the central nervous system. Contains: petrol
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Water spray, Use dry chemical powder, carbon dioxide, sand, earth only in case of a small fire
Do not use a high volume water jet
Vapours are heavier than air and spread above ground. Possible ignition from a distance. Floats on water and may be ignited again.
Shut off leaks if without risks.
Firefighter Protection
Protective clothing - Compressed air/oxygen apparatus - protective gloves (neoprene, nitrile) - A protective suit PVC with hood
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent soil and water pollution - Do not inhale vapour - Close doors and windows of adjacent premises - Notify experts - Evacuate all personnel that isn't necessary. - Shut off leaks if without risks.
Absorb small amounts of spilled material with sand or earth or an other absorbent material
Prevent soil and water pollution
Absorb small amounts of spilled material with sand or earth or an other absorbent material - Contain released substance, pump into suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not inhale vapour. No naked flames. When using, do not eat, drink or smoke. Keep away from ignition sources/sparks. ventilate the area. Take precautions against electrostatic charges. Ensure adequate ventilation in case of release of gases/vapours.
Keep container tightly closed in a cool, well-ventilated place. Keep away from direct sunlight, heat sources and sources of ignition
When using, do not eat, drink or smoke.
No naked flames. Keep away from ignition sources/sparks. Take precautions against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust, locally and generally. Work under local exhaust/ventilation.
solvent-resistant gloves
Safety glasses
If local exhaustion is insufficient, wear full-face mask.
Standard working clothes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Heat. fire, naked flames. sparks
When liquid avoid synthetic material, water
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLAGCOL TF1?
The signal word is na: r-phrases.
What is the physical form of FLAGCOL TF1?
FLAGCOL TF1 is a liquid with blue color. It has aromatic odour odor.
What is FLAGCOL TF1 used for?
Industrial use, Professional use, Contact adhesive