Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLAGCOL P1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Contact adhesive
Manufacturers & Suppliers
Soprema
Bouwelven 5, 2280 GROBBENDONK, België
+32 (0) 14.23.07.07
Emergency Contacts
Belgian poison control centre
00 32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. In case of respiratory collapse: apply mouth-to-mouth resuscitation. When there is no quick recovery : consult a doctor/medical service.
Rinse immediately with plenty of water. Wash with water and soap. In all cases of doubt, or when symptoms persist, seek medical attention.
Symptoms: skin irritation, Dry skin, Repeated or prolonged contact with the product may cause skin diseases.
Rinse immediately with plenty of water. Take victim to a doctor if irritation persists.
Do not induce vomiting. When there is no quick recovery : consult a doctor/medical service.
Immediate Medical Attention
When there is no quick recovery : consult a doctor/medical service. In all cases of doubt, or when symptoms persist, seek medical attention.
Medical Treatment
Causes damage to the central nervous system. Contains. ethylacetate. methyl ethyl ketone. toluene
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Water spray, Use dry chemical powder, carbon dioxide, sand, earth only in case of a small fire
Do not use a high volume water jet
Vapours are heavier than air and spread above ground. Possible ignition from a distance. Floats on water and may be ignited again.
Shut off leaks if without risks.
Firefighter Protection
Protective clothing - Compressed air/oxygen apparatus - protective gloves (neoprene, nitrile) - A protective suit PVC with hood
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent soil and water pollution - Do not inhale vapour - Close doors and windows of adjacent premises - Notify experts - Evacuate all personnel that isn't necessary. - Shut off leaks if without risks.
Absorb small amounts of spilled material with sand or earth or an other absorbent material
Prevent soil and water pollution
Contaminated surfaces: clean (treat) with an excess of water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not inhale vapour. No naked flames. When using, do not eat, drink or smoke. Keep away from ignition sources/sparks. ventilate the area. Take precautions against electrostatic charges. Ensure adequate ventilation in case of release of gases/vapours. Work under local exhaust/ventilation. Do not use compressed air to fill, handle or work up. If positive displacement pumps are used, these must be fitted with a non-integrated pressure relief valve.
Keep container tightly closed in a cool, well-ventilated place. Keep away from direct sunlight, heat sources and sources of ignition
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Heat. fire, naked flames. sparks
When liquid avoid synthetic material water
acetic acid. ethanol
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- ADHESIVES containing flammable liquids
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLAGCOL P1?
The signal word is danger.
What is the physical form of FLAGCOL P1?
FLAGCOL P1 is a liquid with white color. It has ketones odor.
What is FLAGCOL P1 used for?
Industrial use, Professional use, Contact adhesive
What are the hazard statements for FLAGCOL P1?
This substance has 5 hazard statements:
- EUH066: Repeated exposure may cause skin dryness or cracking.
- H220: Highly flammable.
- H319: Irritating to eyes.
- H336: Vapours may cause drowsiness and dizziness.
- H360D: Possible risk of harm to the unborn child.