NextSDS Logo
Safety Data Sheet EN

SOLVENT 1112

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SOLVENT 1112
Product Code
SOLV 1112

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial. For professional use only.

Manufacturers & Suppliers

F

Fourny

manufacturer

Hoeikensstraat 1, 2830 Willebroek Belgique-Belgie

+32 (0)3 886 27 70

Emergency Contacts

Emergency Contact

00 32 (0)70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methylethylketon EC: 201-159-0 78-93-3 20 - 30% Yes
Toluene EC: 203-625-9 108-88-3 70 - 80% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Assure fresh air breathing. Rest.

Skin contact

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Eye contact

Rinse immediately with plenty of water.

Symptoms: pain, blinking, tears or redness

Ingestion

Rinse mouth. DO NOT INDUCE VOMITING.

Immediate Medical Attention

If you feel unwell, seek medical advice. Obtain medical attention if pain, blinking, tears or redness persist. If swallowed, seek medical advice immediately and show this container or label.

Medical Treatment

Cause a depression of the central nervous system.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Powder. Sand. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

May form flammable/explosive vapour-air mixture.

Instructions

Exercise caution when fighting any chemical fire. Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Collect spills and put it into appropriated container. Recover the cleaning water for later disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Good ventilation of the workplace required. No naked lights. No smoking. Store and handle as though always a serious potential fire/explosion and health hazard exists. In use, may form flammable vapour-air mixture. Handle empty containers with care because residual vapours are flammable. Ensure prompt removal from eyes, skin and clothing.

Storage

Keep in fireproof place. Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use. Away from: Heat sources. Direct sunlight.

Hygiene

Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work.

Fire prevention

No naked lights. No smoking. Keep in fireproof place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Local exhaust and general room ventilation are both essential to prevent accumulation of flammable vapour or dust mixtures.

Hands

Use neoprene gloves.

Eyes

Goggles.

Respiratory

If used outside of a hood, adequate ventilation will be required to prevent exposure.

Skin/Body

Total impervious protective suits, gloves, and boots must be worn.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Voc Content
---
Vapor Density
---
Bulk Density
---
Flash Point
-6 °C
Ph
Not applicable.
Freezing Point
---
Physical State
Liquid.
Boiling Point
---
Physical State Data
liquid
Solubility In Fat
---
Crystallisation Point
---
Flammability
---
Relative Evaporation Rate
---
Solubility
---
Decomposition Temperature
---
Explosive Limits
---
Solubility In Water
ca. 60 g/l
Form
---
Partition Coefficient
---
Density
0.853
Vapor Pressure
---
Upper Explosive Limit
---
Evaporation Rate
---
Solidification Point
---
Cloud Point
---
Odor
Aromatic.
State Under Standard Conditions
---
Lower Explosive Limit
---
Colour Intensity
---
Auto Ignition Temperature
---
Melting Point
---
Dynamic Viscosity
---
Colour
Colourless.
Odor Threshold
---
Molecular Weight
---
Softening Point
---
Kinematic Viscosity
---
Metal Corrosion
---
Properties Status
---
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Hazardous reactions

In use, may form flammable/explosive vapour-air mixture.

Avoid

Open flame. Overheating. Direct sunlight.

Decomposition

May release flammable gases. When heated to decomposition, emits dangerous fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
PAINT / PAINT RELATED MATERIAL
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SOLVENT 1112?

The signal word is na: r-phrases.

What is the physical form of SOLVENT 1112?

SOLVENT 1112 is a liquid. with colourless. color. It has aromatic. odor.

What is SOLVENT 1112 used for?

Industrial. For professional use only.