Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Treated slate flakes
- Product Code
- PT...
- Chemical Name
- Treated slate flakes
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Exempt from registration according to Annex V of REACH.
Identified Uses
Building product.
Manufacturers & Suppliers
Carrières des Lacs
manufacturer
Les Lacs N°2, 35500 St AUBIN des LANDES, France
0299495109
Emergency Contacts
NHS 111
111
NHS 24
111
Belfast HSC Trust (North & West)
028 9074 4447
Belfast HSC Trust (South & East)
028 9079 6220
South Eastern HSC Trust (North Down & Ards)
028 9182 2344
South Eastern HSC Trust (Lisburn & Downpatrick)
028 9260 2204
Dalriada Urgent Care (Northern Trust area)
028 2566 3500
Southern HSC Trust
028 3839 9201
Western Urgent Care
028 7186 5195
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Type 4 to 100% natural shale.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz (SiO2) [2] EC: 238-878-4 | 14808-60-7 | 1% | No |
[2] these substances represent the respirable particles.
Notes
The substance does not contain any substances classified as Substances of Very High Concern (SVHC) by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table. According to the knowledge of the substance, no nanomaterials have been identified.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Wash with soap and water.
In case of eye irritation consult an ophthalmologist. Rinse immediately carefully and thoroughly with eye-bath or water.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Medical Treatment
No specific first aid measures; Follow the advice given in section 4.1.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Non-combustible. No special extinguishing equipment is required.
No restrictions on the means of extinction.
Non-combustible.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
No specific recommendation.
Avoid dry sweeping and use water spray or vacuum systems (equipped with a high-efficiency particulate air filter) to avoid airborne dust. Clean contaminated objects and areas thoroughly observing environmental regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Avoid contact with skin, eyes and clothes. Work in well ventilated zones or use proper respiratory protection.
Ensure adequate ventilation of the storage area.
Wash hands before breaks and after work. Remove contaminated, saturated clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations. Technical measures and the application of suitable work processes have priority over personal protection equipment.
It is recommended that workers suffering from dermatitis or with sensitive skin use appropriate protection (gloves, barrier cream, etc.).
Wear eye protection equipment.
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Suitable respiratory protection apparatus: Wear respiratory protection. Recommended respiratory protection articles: We recommend the use of a minimum of a FFP2 or FFP3 mask, depending on the duration of exposure, CE marked and respecting the EN 149 and EN 143:2000 standards. Remark: The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. Observe the wear time limits as specified by the manufacturer. Use only respiratory protection equipment with CE-symbol including four digit test number.
No specific requirements.
Not available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when stored at normal ambient temperatures.
Inert, non-reactive material.
No hazardous reaction when handled and stored according to provisions.
Inert material, no specific conditions to avoid.
Inert material, no incompatibilities.
Inert material, no decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Treated slate flakes?
The signal word is no signal word.
What is the physical form of Treated slate flakes?
Treated slate flakes is a solid with light grey color. It has not available odor.
What is the solubility of Treated slate flakes?
Not available
What is Treated slate flakes used for?
Building product.
What is the melting point of Treated slate flakes?
The melting point is Not available and the boiling point is Not available.