Nitric acid 68% AnalaR NORMAPUR®

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

Co-ordinate fire-fighting measures to the fire surroundings.

no restriction

May intensify fire; oxidiser.

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers.

Do not breathe gas/vapour/aerosol. Provide adequate ventilation. Use personal protection equipment. In case of major fire and large quantities: Remove persons to safety.

Do not allow to enter into surface water or drains. Make sure spills can be contained, e.g. in sump pallets or kerbed areas. Discharge into the environment must be avoided.

Clean contaminated articles and floor according to the environmental legislation.

Avoid inhalation. Avoid contact with eyes and skin. Protect from moisture.

Keep container tightly closed and in a well-ventilated place.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber), Thickness of the glove material: 0,30 mm, Breakthrough time (maximum wearing time): 60-120 min, Recommended glove articles: VWR 112-3779. By long-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber)/FKM (fluoro rubber), Thickness of the glove material: 0,70 mm, Breakthrough time (maximum wearing time): 240-480 min, Recommended glove articles: VWR 112-3819.

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

no data available

The product is chemically stable under standard ambient conditions (room temperature).

Oxidising agent, strong. Corrosive to metals

Explosive when mixed with combustible material. Explosive reaction with: Alkali metals, Alkaline earth metal, Alkali (lye), Substance, organic, Reducing agent, Peroxides, Oil. Violent reaction with: light metals, Powdered metals. Formation of: Hydrogen. Exothermic reaction with: Water.

Humidity, Heat

Metal

no data available

Passage forbidden through tunnels of category E.

Segregation group: 1