NextSDS Logo
Safety Data Sheet EN

Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS

CAS 7664-38-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS
Product Code
20624
Chemical Name
Orthophosphoric acid

Regulatory Identifiers

CAS Number
7664-38-2 Check regulations →

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

distributor

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

V

VWR CHEMICALS

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 May be corrosive to metals.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302 + P352 IF ON SKIN: Wash with plenty of water/...
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Orthophosphoric acid EC: 231-633-2 7664-38-2 80 - 90% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

Immediate Medical Attention

Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

Water

Specific hazards

In case of fire may be liberated: Phosphorus oxides

Instructions

DO NOT fight fire when fire reaches explosives.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Discharge into the environment must be avoided.

Cleanup methods

Collect in closed and suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes and skin. Wash hands before breaks and after work. When using do not eat, drink or smoke.

Storage

Keep container tightly closed and in a well-ventilated place.

Hygiene

Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NR (natural rubber, Natural latex), Thickness of the glove material: 0,75 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-2152. By long-term hand contact: Suitable material: NR (natural rubber, Natural latex), Thickness of the glove material: 0,75 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-2152.

Eyes

Eye glasses with side protection DIN-/EN-Norms DIN EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Odor
odourless
Solidification Point
---
Solubility In Fat
---
Colour
colourless
Cloud Point
---
Partition Coefficient
no data available
Evaporation Rate
no data available
Solubility In Water
soluble
Density
1.689 g/cm³ (20 °C)
Vapor Density
no data available
Form
---
Flash Point
no data available
Colour Intensity
---
Odor Threshold
no data available
Lower Explosive Limit
no data available
Dynamic Viscosity
no data available
Properties Status
---
Decomposition Temperature
not applicable
Metal Corrosion
---
Boiling Point
~158 °C
Molecular Weight
---
State Under Standard Conditions
---
Auto Ignition Temperature
no data available
Kinematic Viscosity
30.5 cSt (25 °C)
Physical State
liquid
Solubility
---
Freezing Point
---
Bulk Density
---
Physical State Data
liquid
Softening Point
---
Ph
< 0.5 (100 g/l; 20 °C)
Upper Explosive Limit
no data available
Relative Density
---
Flammability
not applicable
Voc Content
---
Crystallisation Point
---
Vapor Pressure
2 hPa (20 °C)
Explosive Limits
---
Melting Point
~21 °C
Appearance
colourless
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

Corrosive to metals

Hazardous reactions

Explosive reaction with: Alkali metals, Alkaline earth metal, Alkali (lye); Violent reaction with: Water, light metals, Powdered metals; Exothermic reaction with: Water, Substance, organic

Avoid

Humidity, Keep away from heat.

Incompatible

Metal, Water, nitrates, Amines, metals, strong base, Chlorates

Decomposition

Phosphorous oxides formation at high temperature. Contact with metals liberates hydrogen gas. Thermal decomposition: not applicable

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
PHOSPHORIC ACID, SOLUTION
Transport Class
8
Packing Group
III
ADR

Passage forbidden through tunnels of category E.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

The signal word is danger.

What is the physical form of Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS is a liquid appearing as colourless with colourless color. It has odourless odor.

What is Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS used for?

General chemical reagent

What are the hazard statements for Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

The melting point is ~21 °C and the boiling point is ~158 °C.