NextSDS Logo
Safety Data Sheet EN

Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.

CAS 7647-01-0

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.
Product Code
20252

Regulatory Identifiers

CAS Number
7647-01-0 Check regulations →

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

distributor

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1B H314
STOT SE Cat. 3 H335

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302 + P352 IF ON SKIN: Wash with plenty of water/…
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrochloric acid EC: 231-595-7 7647-01-0 30 - 40% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

Immediate Medical Attention

Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Hydrogen chloride (HCl)

Instructions

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Evacuate area.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of major fire and large quantities: Remove persons to safety.

Large spill

In case of major fire and large quantities: Remove persons to safety. Wear a self-contained breathing apparatus and chemical protective clothing.

Environmental

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.

Cleanup methods

Soak up inert absorbent and dispose as waste requiring special attention. Clean contaminated articles and floor according to the environmental legislation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid: Inhalation. Avoid contact with eyes and skin.

Storage

Recommended storage temperature: 15-25 °C. Keep container tightly closed and in a well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Flash Point
no data available
Crystallisation Point
---
Colour Intensity
---
Solubility In Water
soluble (20°C)
Ph
< 1 (20 °C)
Physical State
liquid
Form
---
Relative Density
1.18 g/cm³ (20 °C)
Solubility
---
Boiling Point
no data available
Vapor Pressure
190 hPa (20 °C)
Upper Explosive Limit
no data available
Vapor Density
no data available
Evaporation Rate
no data available
Molecular Weight
---
Solubility In Fat
---
Bulk Density
no data available
Cloud Point
---
Colour
colourless
Dynamic Viscosity
2.3 mPa*s (15 °C)
Melting Point
no data available
Auto Ignition Temperature
no data available
Odor Threshold
no data available
Softening Point
---
Flammability
not applicable
Appearance
colourless
Physical State Data
liquid
Density
---
Properties Status
---
Freezing Point
---
Relative Evaporation Rate
---
Lower Explosive Limit
no data available
Voc Content
---
Explosive Limits
---
Partition Coefficient
no data available
Metal Corrosion
---
Kinematic Viscosity
no data available
Solidification Point
---
Decomposition Temperature
no data available
Odor
pungent
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

Corrosive to metals

Hazardous reactions

Explosive reaction with: Alkali metals Alkaline earth metal Alkali (lye) Violent reaction with: light metals Powdered metals Exothermic reaction with: Water Substance, organic

Avoid

Humidity

Incompatible

Metal

Decomposition

no data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1789
Shipping Name
HYDROCHLORIC ACID
Transport Class
8
Packing Group
II
IMDG

Segregation group: 1

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.?

The signal word is danger.

What is the physical form of Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.?

Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur. is a liquid appearing as colourless with colourless color. It has pungent odor.

What is Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur. used for?

General chemical reagent

What are the hazard statements for Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of Hydrochloric acid 37% AnalaR NORMAPUR® Reag. Ph. Eur.?

The melting point is no data available and the boiling point is no data available.