NextSDS Logo
Safety Data Sheet EN

Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS

CAS 64-17-5

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS
Product Code
20821

Regulatory Identifiers

CAS Number
64-17-5 Check regulations →
REACH No.
01-2119457610-43-XXXX

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

distributor

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

V

VWR

B

BDH CHEMICALS

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 Take precautionary measures against static discharge.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 + P235 Store in a well-ventilated place. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Ethanol absolute 64-17-5 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

Symptoms: skin reactions

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

Immediate Medical Attention

Obtain immediate medical attention if swallowed. Consult a physician in case of skin reactions. Consult an ophthalmologist in case of eye contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Instructions

Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of major fire and large quantities: Remove persons to safety.

Environmental

Discharge into the environment must be avoided.

Cleanup methods

Collect in closed and suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

All work processes must always be designed so that the following is as low as possible: Inhalation skin contact Eye contact Keep away from sources of ignition. - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges. Protect from moisture.

Storage

Keep container tightly closed and in a well-ventilated place.

Fire prevention

Keep away from sources of ignition. - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: DIN EN 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Breakthrough time (maximum wearing time): 240-480 min, Recommended glove articles: VWR 112-3717 / 112-1381. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,425 mm, Breakthrough time (maximum wearing time): >480 min, Recommended glove articles: VWR 112-0971.

Eyes

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
---
Odor
no data available
Odor Threshold
no data available
Ph
7 (20 °C)
Melting Point
-117 °C
Boiling Point
78.3 °C (1013 hPa)
Flash Point
12 °C (closed cup)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
no data available
Vapor Pressure
59 hPa (20 °C)
Vapor Density
1.59 (20 °C)
Relative Density
0.7895 g/cm³ (20 °C)
Bulk Density
not applicable
Density
---
Flammability
Highly flammable liquid and vapour.
Upper Explosive Limit
19 % (v/v)
Lower Explosive Limit
3.3 % (v/v)
Explosive Limits
---
Auto Ignition Temperature
425 °C
Decomposition Temperature
no data available
Solubility
---
Partition Coefficient
-0.31 (20 °C)
Solubility In Water
soluble (20 °C)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
1.2 mPa*s (20 °C)
Kinematic Viscosity
no data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

no data available

Hazardous reactions

no data available

Avoid

no data available

Incompatible

no data available

Decomposition

no data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1170
Shipping Name
ETHANOL
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS?

The signal word is danger.

What is the physical form of Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS?

Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS is a liquid with colourless color. It has no data available odor.

What is Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS used for?

General chemical reagent

What are the hazard statements for Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS?

This substance has 2 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H319: Causes serious eye irritation.

What is the melting point of Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS?

The melting point is -117 °C and the boiling point is 78.3 °C (1013 hPa).