NextSDS Logo
Safety Data Sheet EN

Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur

CAS 64-17-5

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur
Product Code
100983
Synonyms
EtOH

Regulatory Identifiers

CAS Number
64-17-5 Check regulations →

Identified Uses

Reagent for analysis, Chemical production

Manufacturers & Suppliers

E

EMD Millipore Corporation

manufacturer

290 Concord Road, Billerica, MA 01821, United States of America

+1-978-715-4321

Emergency Contacts

CHEMTREC (USA)

800-424-9300

24 Hours/day; 7 Days/week

CHEMTREC (International)

+1-703-527-3887

24 Hours/day; 7 Days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H225 Highly flammable liquid and vapor.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P403 + P235 Store in a well-ventilated place. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Formula C₂H₅OH C₂H₆O (Hill) Synonyms EtOH Molar mass 46.07 g/mol Hazardous ingredients

Chemical Name CAS Number Concentration Hazardous
ethanol 64-17-5 90 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

After skin contact: wash off with plenty of water. Remove contaminated clothing.

Eye contact

After eye contact: rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.

Ingestion

After swallowing: immediately make victim drink water (two glasses at most). Consult doctor in the event of any complaints. Never give anything by mouth to an unconscious person.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO2), Foam, Dry powder, Water

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at ambient temperatures. Pay attention to flashback. Development of hazardous combustion gases or vapors possible in the event of fire.

Instructions

Remove container from danger zone and cool with water.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid substance contact. Do not breathe vapors, aerosols. Keep away from heat and sources of ignition. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental

Do not empty into drains. Risk of explosion.

Cleanup methods

Collect, bind, and pump off spills. Take up with liquid-absorbent material (e.g. Chemizorb®). Clean up affected area.

Materials: liquid-absorbent material (e.g. Chemizorb®)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Observe label precautions.

Storage

Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Storage temperature: no restrictions.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colorless
Colour Intensity
---
Form
---
Odor
alcohol-like
Odor Threshold
0.1 - 5058.5 ppm
Ph
7.0 at 10 g/l 68 °F (20 °C)
Melting Point
-114.5 °C
Boiling Point
172.9 °F (78.3 °C) at 1,013 hPa
Flash Point
54 °F (12 °C) Method: c.c.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available.
Vapor Pressure
59 hPa at 68 °F (20 °C)
Vapor Density
---
Relative Density
No information available.
Bulk Density
---
Density
0.790 - 0.793 g/cm³ at 68 °F (20 °C)
Flammability
No information available.
Upper Explosive Limit
15 %(V)
Lower Explosive Limit
3.5 %(V)
Explosive Limits
---
Auto Ignition Temperature
797 °F (425 °C) Method: DIN 51794
Decomposition Temperature
Distillable in an undecomposed state at normal pressure.
Solubility
---
Partition Coefficient
log Pow: -0.31 (experimental) (Lit.) Bioaccumulation is not expected.
Solubility In Water
at 68 °F (20 °C) completely miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
1.2 mPa.s at 68 °F (20 °C)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

Vapors may form explosive mixture with air.

Hazardous reactions

Risk of explosion/exothermic reaction with: hydrogen peroxide, perchlorates, perchloric acid, Nitric acid, mercury(II) nitrate, permanganic acid, Nitriles, peroxi compounds, Strong oxidizing agents, nitrosyl compounds, Peroxides, sodium, Potassium, halogen oxides, calcium hypochlorite, nitrogen dioxide, metallic oxides, uranium hexafluoride, iodides, Chlorine, Alkali metals, Alkaline earth metals, alkali oxides, Ethylene oxide silver, with, Nitric acid; silver compounds, with, Ammonia; potassium permanganate, with, conc. sulfuric acid. Risk of ignition or formation of inflammable gases or vapors with: halogen-halogen compounds, chromium(VI) oxide, chromyl chloride, Fluorine, hydrides, Oxides of phosphorus, platinum; Nitric acid, with, potassium permanganate

Avoid

Warming.

Incompatible

rubber, various plastics

Decomposition

no information available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1170
Shipping Name
ETHANOL
Transport Class
3
Packing Group
II
IMDG

yes

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur known by?

Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur is also known as: EtOH

What is the hazard signal word for Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur?

The signal word is danger.

What is the physical form of Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur?

Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur is a liquid with colorless color. It has alcohol-like odor.

What is Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur used for?

Reagent for analysis, Chemical production

What are the hazard statements for Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapor.

What is the melting point of Ethanol absolute for analysis EMSURE® ACS,ISO,Reag. Ph Eur?

The melting point is -114.5 °C and the boiling point is 172.9 °F (78.3 °C) at 1,013 hPa.