NextSDS Logo
Safety Data Sheet EN

Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS

CAS 110-82-7

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS
Product Code
23224
Chemical Name
Cyclohexane
Synonyms
Hexamethylene

Regulatory Identifiers

CAS Number
110-82-7 Check regulations →
REACH No.
01-2119463273-41-XXXX

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

V

VWR

distributor

B

BDH CHEMICALS

distributor

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Asp. Tox. Cat. 1 H304
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 Take precautionary measures against static discharge.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water/...
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF SWALLOWED: Do NOT induce vomiting.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Cyclohexane 110-82-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Instructions

DO NOT fight fire when fire reaches explosives.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

In case of major fire and large quantities: Remove persons to safety.

Environmental

Discharge into the environment must be avoided.

Cleanup methods

Collect in closed and suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation. Avoid contact with eyes and skin. Keep away from sources of ignition - No smoking.

Storage

Keep container tightly closed and in a well-ventilated place.

Fire prevention

Keep away from sources of ignition - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381

Eyes

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
2.9 (20 °C)
Solubility
---
State Under Standard Conditions
---
Freezing Point
---
Vapor Pressure
103 hPa (20 °C)
Auto Ignition Temperature
260 °C
Bulk Density
no data available
Flash Point
-18 °C
Melting Point
7 °C
Dynamic Viscosity
0.98 mPa*s (20 °C)
Odor
no data available
Kinematic Viscosity
no data available
Solidification Point
---
Properties Status
---
Evaporation Rate
no data available
Physical State Data
liquid
Form
---
Crystallisation Point
---
Solubility In Fat
---
Odor Threshold
no data available
Flammability
Highly flammable liquid and vapour.
Ph
no data available
Appearance
colourless
Colour Intensity
---
Relative Density
0.7785 g/cm³ (20 °C)
Partition Coefficient
3.44 (20 °C)
Upper Explosive Limit
8.4 % (v/v)
Decomposition Temperature
no data available
Colour
colourless
Relative Evaporation Rate
---
Voc Content
---
Softening Point
---
Molecular Weight
---
Density
---
Cloud Point
---
Lower Explosive Limit
1.3 % (v/v)
Metal Corrosion
---
Solubility In Water
500 mg/l (20 °C)
Physical State
liquid
Boiling Point
81 °C (1013 hPa)
Explosive Limits
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

Vapours can form explosive mixtures with air.

Hazardous reactions

Formation of explosive mixtures with: Oxidising agent, strong

Avoid

This material is combustible and can be ignited by heat, sparks, flames, or other sources of ignition (e.g. static electricity, pilot lights, or mechanical/electrical equipment).

Incompatible

Rubber articles, Plastic articles

Decomposition

no data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1145
Shipping Name
CYCLOHEXANE
Transport Class
3
Packing Group
II
ADR

Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS known by?

Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS is also known as: Hexamethylene

What is the hazard signal word for Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

The signal word is danger.

What is the physical form of Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS is a liquid appearing as colourless with colourless color. It has no data available odor.

What is Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS used for?

General chemical reagent

What are the hazard statements for Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS?

The melting point is 7 °C and the boiling point is 81 °C (1013 hPa).