Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS
- Product Code
- 20810
- Chemical Name
- Butan-1-ol
- Synonyms
- 1-Butyl alcohol, 1-Hydroxy butane, n-Butanol, Propyl carbinol
Regulatory Identifiers
- CAS Number
- 71-36-3 Check regulations →
- REACH No.
- 01-2119484630-38-XXXX
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butan-1-ol EC: 200-751-6 | 71-36-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen
Strong water jet
In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of major fire and large quantities: Remove persons to safety.
Discharge into the environment must be avoided.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
1-Propanol AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 71-23-8
Acetone AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS
CAS: 67-64-1
Cyclohexane AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 110-82-7
4-Methyl-2-pentanone AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 108-10-1
Methanol AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent
CAS: 67-56-1
Nitric acid 69% AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 7697-37-2
Ethanol absolute AnalaR NORMAPUR® Reag. Ph. Eur., Reag. USP, ACS
CAS: 64-17-5
Ammonium acetate AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 631-61-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation, contact with eyes and skin. When using do not eat, drink or smoke. Wash hands before breaks and after work.
Keep container tightly closed and in a well-ventilated place.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Keep away from sources of ignition - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time:: 70 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time:: >480 min, Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms DIN EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
Vapours can form explosive mixtures with air.
Reaction with: - Oxidising agent, strong
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.
Oxidising agent, strong, Acids, halogenated hydrocarbons, Aluminium, Reducing agent
Carbon monoxide, Carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Ecotoxicity
12.1 Ecotoxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT/vPvB assessment
The substance does not meet the PBT/vPvB criteria of REACH, Annex XIII.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a hazardous waste incinerator facility under observation of official regulations.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1120
- Shipping Name
- BUTANOLS
- Transport Class
- 3
- Packing Group
- III
Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU legislation and national water hazard classification provided.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS known by?
Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS is also known as: 1-Butyl alcohol, 1-Hydroxy butane, n-Butanol, Propyl carbinol
What is the hazard signal word for Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS?
The signal word is danger.
What is the physical form of Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS?
Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS is a liquid appearing as colourless with colourless color. It has characteristic odor.
What is Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS used for?
General chemical reagent
What are the hazard statements for Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS?
This substance has 6 hazard statements:
- H226: Flammable liquid and vapour.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Butan-1-ol AnalaR NORMAPUR® Reag. Ph.Eur., ACS?
The melting point is -89 °C and the boiling point is 119 °C (1013 hPa).