Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Isoamyl alcohol TECHNICAL
- Product Code
- 20797
Regulatory Identifiers
- CAS Number
- 123-51-3 Check regulations →
- REACH No.
- Not yet communicated down the supply chain.
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
distributor
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isoamyl alcohol | 123-51-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
Obtain immediate medical attention if accidentally swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen
no restriction
In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of major fire and large quantities: Remove persons to safety.
Discharge into the environment must be avoided.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Isoamyl acetate
CAS: 123-92-2
Isoamyl alcohol for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 123-51-3
2-Propanol TECHNICAL
CAS: 67-63-0
2-Propanol TECHNICAL
CAS: 67-63-0
2-Ethoxyethanol TECHNICAL
CAS: 110-80-5
ISO-NONYL ALCOHOL
---
ETHANOLAMINE (1,1,2,2-D4, 98%)
CAS: 85047-08-1
ISOBUTANOL
CAS: 78-83-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Inhalation. Avoid contact with skin and eyes.
Keep container tightly closed and in a well-ventilated place.
Keep away from sources of ignition. - No smoking. Usual measures for fire prevention. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: DIN EN 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): 120-240 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1105
- Shipping Name
- PENTANOLS
- Transport Class
- 3
- Packing Group
- III
Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Isoamyl alcohol TECHNICAL?
The signal word is warning.
What is the physical form of Isoamyl alcohol TECHNICAL?
Isoamyl alcohol TECHNICAL is a liquid appearing as colourless with colourless color.
What is Isoamyl alcohol TECHNICAL used for?
General chemical reagent
What are the hazard statements for Isoamyl alcohol TECHNICAL?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Isoamyl alcohol TECHNICAL?
The melting point is -117 °C and the boiling point is 130 °C (1013 hPa).