NextSDS Logo
Safety Data Sheet EN

INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT
Product Code
043810

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professional use. For industrial or institutional use. Antifreeze and de-icing products. Coolant.

Manufacturers & Suppliers

Star Brite logo

Star Brite

manufacturer

4041 SW 47th Avenue, 33314 Fort Lauderdale, Florida, United States of America

+1-954 587-6280

http://www.starbrite.com

Emergency Contacts

Emergency Contact

+1-703-527-3887

During office hours only

Chemtrec

001 703 5273887

24/7

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
STOT RE Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H373 May cause damage to kidneys through prolonged or repeated exposure.

Precautionary Statements

P260 Do not breathe vapours.
P264 Wash hands thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P314 Get medical advice/attention if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container to an official chemical waste depot.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanediol 107-21-1 30 - 60% Yes
2,2'-Oxybisethanol 111-46-6 1 - 5% Yes
1,2-Benzisothiazol-3(2H)-one 2634-33-5 0.05% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move victim into fresh air. Consult a doctor if victim feels unwell.

Symptoms: May cause headache, dizziness and a feeling of sickness.

Skin contact

Take off contaminated clothing. Wash off skin with plenty of water and soap before product dries up. Consult a doctor if irritation occurs.

Symptoms: May produce an allergic reaction. May cause dry skin.

Eye contact

Wash out with (lukewarm) water. Remove contact lenses. Consult a doctor if irritation persists.

Symptoms: May cause stinging of eyes and redness.

Ingestion

Do not induce vomiting. Do rinse the mouth. Give one glass of water. Never give anything by mouth to an unconscious person. Consult a doctor immediately if victim feels unwell.

Symptoms: May cause a feeling of sickness, vomiting and diarrhoea. May cause a feeling of sickness, malaise, shortness of breath and lack of breathe.

Immediate Medical Attention

Consult a doctor immediately if victim feels unwell.

Medical Treatment

Risk of metabolic acidosis.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbondioxide (CO2). Alcohol resistant foam. Dry chemical. Water fog.

Unsuitable media

Use of heavy stream of water may spread fire.

Specific hazards

None known.

Firefighter Protection

Use adequate respiratory equipment in case of insufficient ventilation.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Clean up spills immediately. Avoid contact with spilled or released material.

Large spill

In case of large spills: contain with dike.

Environmental

Avoid release of product into sewers, surface water and/or ground water. In case of large spills: contain with dike.

Cleanup methods

Clean up spills immediately.

Materials: sand or other inert material, water and soap

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good occupational hygiene and safety practices in well-ventilated areas. Do not breathe vapour. Avoid contact with skin and eyes. Avoid splashing. Wear protective clothing.

Storage

Keep in a cool, dry and well-ventilated place.

Hygiene

Handle in accordance with good occupational hygiene and safety practices

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in well-ventilated areas. Comply with standard precautionary measures for working with chemicals.

Hands

Under normal conditions of use specific gloves are not required. Wear suitable gloves in case of frequent or prolonged use and in case of large scale exposure. Suitable material: nitril. ± 0,5 mm. Indication of permeation breakthrough time: 6 hours.

Eyes

Wear appropriate safety glasses with side shields when there is danger of possible eye contact.

Respiratory

Take care of sufficient ventilation. Wear suitable respiratory protection in case of large scale exposure. Suitable: gas filter type A (brown), class I or higher on e.g. a facemask.

Skin/Body

Use of specific protective industrial clothing is not required under normal conditions of use. In case of large scale exposure wear suitable protective clothing, overalls or suit, and similar boots. Suitable material: nitril. Indication of permeation breakthrough time: 6 hours.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless.
Colour Intensity
---
Form
---
Odor
Characteristic.
Odor Threshold
Not known.
Ph
8
Melting Point
---
Boiling Point
> 100 °C
Flash Point
> 100 °C Closed Cup (ISO 2719, EN 11, DIN 51758, ASTM D 93).
Freezing Point
-40 °C
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not known. (n-butyl acetate = 1)
Vapor Pressure
Not known.
Vapor Density
---
Relative Density
1,08 g/ml
Bulk Density
---
Density
---
Flammability
Not applicable. Liquid. See flashpoint.
Upper Explosive Limit
37 (2,2' -Oxybisethanol)
Lower Explosive Limit
0.7 (2,2' -Oxybisethanol)
Explosive Limits
---
Auto Ignition Temperature
> 180 °C
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
Not known. Not measured. Not relevant for mixtures.
Solubility In Water
Soluble.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

See sub-sections below.

Hazardous reactions

No other hazardous reactions known.

Avoid

See section 7.

Incompatible

Keep away from oxidizing agents.

Decomposition

Not known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT?

The signal word is warning.

What is the physical form of INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT?

INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT is a liquid. with colourless. color. It has characteristic. odor.

What is INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT used for?

Professional use. For industrial or institutional use. Antifreeze and de-icing products. Coolant.

What are the hazard statements for INDUSTRIAL SUPREME - ALL WEATHER PROTECTION LOW CONDUCTIVITY ANTIFREEZE/ COOLANT?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H373: May cause damage to kidneys through prolonged or repeated exposure.