Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Jokisch Monos Prix V4G
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal cutting paste
Uses advised against
No information available.
Manufacturers & Suppliers
Jokisch GmbH Germany
manufacturer
Industriestraße 5, D-33813 Oerlinghausen
+49(0)5202/9734-0
http://www.jokisch-fluids.de
Emergency Contacts
JRR
+1 872 5888271
24h
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
none (according to Regulation (EC) No 1907/2006 (REACH))
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Move victim to fresh air. Put victim at rest and keep warm.
Wash with plenty of water. Take off contaminated clothing and wash it before reuse.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting.
Immediate Medical Attention
Consult an ophthalmologist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Co-ordinate fire-fighting measures to the fire surroundings. Water fog. Extinguishing powder. Carbon dioxide. Foam.
High power water jet.
Non-flammable.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove affected person from the danger area and lay down. Do not leave affected person unattended.
Do not allow to enter into surface water or drains. Prevent spread over a wide area (e.g. by containment or oil barriers).
Take up mechanically. Clean contaminated articles and floor according to the environmental legislation. Clean with detergents. Avoid solvent cleaners.
Materials: detergents
Related Products
Similar products with comparable safety profiles
Jotamastic 90 Standard Comp B
---
Jotamastic 90 Comp A
---
TASKI Jontec Best F4e
UFI: 9G35-30QV-000F-TK5V
TASKI Jontec 300 QS F4c
UFI: 1EK6-W007-V007-P6XD
TASKI Jontec 300 J-flex F4c
UFI: 7D25-H0RQ-1001-64M1
GP BIANCO 11048
---
SBZ GPIII 4cSt
CAS: 72623-86-0
TASKI Jontec OmniStrip F1e
UFI: FYP5-X046-U00U-0YFR
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid oil mist. Use only in well-ventilated areas. When using do not eat, drink or smoke. High slip hazard because of leaking or spilled product.
Keep container tightly closed. Keep the packing dry and well sealed to prevent contamination and absorption of humidity. Protect from sunlight. Store in a well-ventilated place.
Take off contaminated clothing. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If local exhaust ventilation is not possible or not sufficient, the entire working area should be ventilated by technical means.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Protect skin by using skin protective cream.
Wear eye protection/face protection.
In case of inadequate ventilation wear respiratory protection. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Chemical resistant safety shoes. Take off immediately all contaminated clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
No hazardous reaction when handled and stored according to provisions.
Protect against: heat.
Oxidizing agents, strong. acid.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Jokisch Monos Prix V4G?
The signal word is no signal word.
What is the physical form of Jokisch Monos Prix V4G?
Jokisch Monos Prix V4G is a paste with brown color. It has characteristic odor.
What is Jokisch Monos Prix V4G used for?
Metal cutting paste
What is the melting point of Jokisch Monos Prix V4G?
The melting point is not determined and the boiling point is not determined.