Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8035 SYN GREASE AE 3
- Product Form
- Aerosol
- Product Code
- 1644283
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Adhesives Technologies India Pvt. Ltd.
importer
D3/D4, MIDC, Jejuri - 412303 India
+91 2115 300017 / 18
www.henkel.com
Emergency Contacts
Henkel Adhesives Technologies India Pvt. Ltd.
+91 2115 300017-18
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol, styrenated EC: 262-975-0 | 61788-44-1 | 1 - 10% | Yes |
| Dichloromethane EC: 200-838-9 | 75-09-2 | 1 - 20% | Yes |
| Petroleum gases, liquefied EC: 270-704-2 | 68476-85-7 | 20 - 40% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Wash with soap and water. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time.
Do not induce vomiting. Keep individual calm. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide. Alcohol foam. Fine water spray
Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Keep away from heat and direct sunlight.
Wash thoroughly after handling.
During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See "Handling and Storage" (Section 7) and "Incompatibility" (Section 10).
Strong oxidizing agents. Air. Reaction with strong acids. Will attack some forms of plastic, rubber, and coatings.
Oxides of carbon. Irritating organic vapours. nitrogen oxides Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8035 SYN GREASE AE 3?
The signal word is na: r-phrases.
What is the physical form of LOCTITE LB 8035 SYN GREASE AE 3?
LOCTITE LB 8035 SYN GREASE AE 3 is a aerosol appearing as brown aerosol . It has solvent odor.