NextSDS Logo
Safety Data Sheet EN

3,3',5,5'-Tetramethylbenzidine

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
3,3',5,5'-Tetramethylbenzidine
Product Code
T1023

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Reagents.

Manufacturers & Suppliers

T

TCI EUROPE N.V.

manufacturer

Boerenveldseweg 6, Haven 1063, B-2070 Zwijndrecht

+32(0)3 735 07 00

Emergency Contacts

Emergency Contact

+32(0)70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash hands and face thoroughly after handling.
P280 Wear protective gloves, eye protection.
IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
3,3',5,5'-Tetramethylbenzidine EC: 259-364-6 54827-17-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.

Skin contact

Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Ingestion

Rinse mouth. Get medical advice/attention if you feel unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, foam, water spray, carbon dioxide.

Specific hazards

Take care as it may decompose upon combustion or in high temperatures to generate poisonous fume.

Instructions

Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. In case of fire in the surroundings: Remove movable containers if safe to do so.

Firefighter Protection

When extinguishing fire, be sure to wear personal protective equipment

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep people away from and upwind of spill/leak. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc

Environmental

Prevent product from entering drains

Cleanup methods

Sweep dust to collect it into an airtight container, taking care not to disperse it.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of dust. Wash hands and face thoroughly after handling. Avoid contact with skin, eyes and clothing.

Storage

Keep container tightly closed. Store in a cool and dark place. Store under inert gas.

Hygiene

Wash hands and face thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Install a closed system or local exhaust as possible so that workers should not be exposed directly.

Hands

Protective gloves.

Eyes

Safety glasses. A face-shield, if the situation requires.

Respiratory

Dust respirator. Follow local and national regulations.

Skin/Body

Protective clothing. Protective boots, if the situation requires.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Odor Threshold
---
Density
---
Evaporation Rate
No data available
Dynamic Viscosity
No data available
Explosive Limits
---
Decomposition Temperature
No data available
Solubility
---
Properties Status
---
Vapor Density
No data available
Voc Content
---
Flash Point
No data available
Solidification Point
---
Vapor Pressure
No data available.
Form
Crystal - Powder
Appearance
---
Softening Point
---
Molecular Weight
---
Partition Coefficient
4.11
Ph
No data available
Solubility In Fat
---
Physical State
Solid
Auto Ignition Temperature
No data available
Solubility In Water
Insoluble
Metal Corrosion
---
Freezing Point
---
Flammability
---
Colour Intensity
---
Cloud Point
---
Melting Point
170°C
Lower Explosive Limit
No data available
Relative Density
No data available
Bulk Density
---
Crystallisation Point
---
Boiling Point
No data available
Physical State Data
solid
Colour
White - Yellowish gray
Upper Explosive Limit
No data available
Odor
No data available
Kinematic Viscosity
No data available
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under proper conditions.

Reactivity

No data available

Hazardous reactions

No special reactivity has been reported.

Avoid

No data available

Incompatible

Oxidizing agents

Decomposition

Carbon dioxide, Carbon monoxide, Nitrogen oxides (NOx)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 3,3',5,5'-Tetramethylbenzidine?

The signal word is warning.

What is the physical form of 3,3',5,5'-Tetramethylbenzidine?

3,3',5,5'-Tetramethylbenzidine is a solid with white - yellowish gray color. It has no data available odor.

What is 3,3',5,5'-Tetramethylbenzidine used for?

Reagents.

What are the hazard statements for 3,3',5,5'-Tetramethylbenzidine?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of 3,3',5,5'-Tetramethylbenzidine?

The melting point is 170°C and the boiling point is No data available.