Hydrogen peroxide 30% stabilized EMPROVE® ESSENTIAL Ph Eur,BP,USP

After inhalation: fresh air.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Oxides of phosphorus, Potassium oxides, Sodium oxides, Tin/tin oxides. Not combustible.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up with liquid-absorbent and neutralising material. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H+, Merck Art. No. 101595)

Observe label precautions.

Tightly closed. Protected from light. Do not store near combustible materials.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Full contact Material: Latex gloves Minimum layer thickness: 0,6 mm Break through time: 480 min Material tested: Lapren® (KCL 706 / Aldrich Z677558, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested: KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

Recommended Filter type: filter NO The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

heat-sensitive Sensitivity to light. Contains the following stabilizer(s): 1-hydroxyethane-1,1-diphosphonic acid (0,0074 %), Disodium tin hexahydroxide (0,0008 %), Ammonium nitrate (0,0015 %), Tetrapotassium diphosphate (0,0003 %)

Has a fire-promoting effect due to release of oxygen.

Risk of explosion with: Acetaldehyde, Acetone, Activated charcoal, Alcohols, formic acid, Ammonia, combustible substances, vinyl acetate, Organic Substances, Powdered metals, Dust, hydrazine and derivatives, hydrides, Ether, Potassium, anilines, Metallic salts, acetic acid, Acetic anhydride, Formaldehyde, furfuryl alcohol, oils, sodium, Lithium, lithium aluminium hydride, organic solvents, Magnesium, metallic oxides, Methanol, Reducing agents, Oxides of phosphorus, butanol, Sulphuric acid, alkali hydroxides, Heavy metals. Exothermic reaction with: alkali hydroxides, antimony sulfide, tin (II) chloride, Sulfides, nitric acid (conc.), ethanol, glycerol, Potassium hydroxide, phosphorus, metallic oxides, Sodium hydroxide, Aldehydes, nonmetals, nonmetallic oxides, strong alkalis, Amines, Acids, Oxidizing agents, alkali salts, Alkali metals, Alkaline earth metals, iodides, peroxi compounds, Brass, organic nitro compounds, phenol, metal catalysts. Risk of ignition or formation of inflammable gases or vapours with: potassium permanganate, Wood/Sawdust, vinyl acetate, Catalyst.

Heating.

Acetaldehyde, Acetone, Activated charcoal, Alcohols, formic acid, Ammonia, combustible substances, vinyl acetate, Organic Substances, Powdered metals, Dust, hydrazine and derivatives, hydrides, Ether, Potassium, anilines, Metallic salts, acetic acid, Acetic anhydride, Formaldehyde, furfuryl alcohol, oils, sodium, Lithium, lithium aluminium hydride, organic solvents, Magnesium, metallic oxides, Methanol, Reducing agents, Oxides of phosphorus, butanol, Sulphuric acid, alkali hydroxides, Heavy metals, antimony sulfide, tin (II) chloride, Sulfides, nitric acid (conc.), ethanol, glycerol, Potassium hydroxide, phosphorus, Sodium hydroxide, Aldehydes, nonmetals, nonmetallic oxides, strong alkalis, Amines, Acids, Oxidizing agents, alkali salts, Alkali metals, Alkaline earth metals, iodides, peroxi compounds, Brass, organic nitro compounds, phenol, metal catalysts, potassium permanganate, Wood/Sawdust, Catalyst.

In the event of fire: see section 5