NextSDS Logo
Safety Data Sheet EN

Zeolite

CAS 1318-02-1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Zeolite
Product Code
96096

Regulatory Identifiers

CAS Number
1318-02-1 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Manufacturers & Suppliers

S

SIGMA-ALDRICH CANADA CO.

manufacturer

2149 WINSTON PARK DRIVE, OAKVILLE ON L6H 6J8, CANADA

+1 905 8299-500

Emergency Contacts

CHEMTREC

+1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Zeolites crystalline alumiosilicates, composed of silica (SiO$_{2}$) and alumina (Al$_{2}$O$_{3}$), in various proportions plus metallic oxides. Produced by hydrothermal treatment of a solid aluminodilicate or of a gel obtained by the reaction of sodium hydroxide,

Chemical Name CAS Number Concentration Hazardous
Zeolites crystalline alumiosilicates, composed of silica (SiO$_{2}$) and alumina (Al$_{2}$O$_{3}$), in various proportions plus metallic oxides. Produced by hydrothermal treatment of a solid aluminodilicate or of a gel obtained by the reaction of sodium hydroxide, EC: 215-283-8 1318-02-1 100% No

* Weight percent

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration.

Skin contact

Wash off with soap and plenty of water.

Eye contact

Flush eyes with water as a precaution.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards

Nature of decomposition products not known.

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid dust formation. Avoid breathing vapours, mist or gas.

Environmental

No special environmental precautions required.

Cleanup methods

Sweep up and shovel.

Materials: suitable, closed containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For precautions see section 2.2.

Storage

Keep container tightly closed in a dry and well-ventilated place.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General industrial hygiene practice.

Hands

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory

Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Environmental

No special environmental precautions required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
No data available
Upper Explosive Limit
No data available
Evaporation Rate
No data available
Dynamic Viscosity
No data available
Auto Ignition Temperature
No data available
Crystallisation Point
---
Flammability
No data available
Relative Evaporation Rate
---
Appearance
---
Metal Corrosion
---
Partition Coefficient
no data available
Colour
---
Melting Point
No data available
Freezing Point
---
Vapor Pressure
No data available
Lower Explosive Limit
No data available
State Under Standard Conditions
---
Colour Intensity
---
Properties Status
---
Explosive Limits
---
Kinematic Viscosity
No data available
Solubility
---
Cloud Point
---
Ph
No data available
Solubility In Water
No data available
Physical State Data
solid
Relative Density
No data available
Bulk Density
---
Softening Point
---
Density
---
Solubility In Fat
---
Form
solid
Solidification Point
---
Decomposition Temperature
No data available
Molecular Weight
---
Physical State
solid
Odor Threshold
No data available
Odor
No data available
Voc Content
---
Flash Point
()Not applicable
Vapor Density
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No data available

Hazardous reactions

No data available

Avoid

Avoid moisture.

Incompatible

Strong acids, Strong bases, Hydrogen fluoride, Chlorine trifluoride, Ethylene oxide, Halogenated hydrocarbon, Oxygen difluoride, Sodium nitrate, Vinyl compoundsStrong acids, Strong oxidizing agents

Decomposition

Hazardous decomposition products formed under fire conditions. - Nature of decomposition products not known. Other decomposition products - No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Zeolite?

The signal word is no signal word.

What is the physical form of Zeolite?

Zeolite is a solid . It has no data available odor.

What is Zeolite used for?

Laboratory chemicals, Synthesis of substances

What is the melting point of Zeolite?

The melting point is No data available and the boiling point is No data available.