Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CBV10A ZEOLITE Na-MORDENITE POWDER
- Synonyms
- Zeolite H-Mordenite Powder
Regulatory Identifiers
- CAS Number
- 1318-02-1 Check regulations →
- EC Number
- 215-283-8 Check regulations →
- REACH No.
- 01-2119429034-49-0011
Identified Uses
Catalyst.
Uses advised against
Not available.
Manufacturers & Suppliers
Zeolyst International
manufacturer
280 Cedar Grove Road, Conshohocken, PA 19428-2240, USA
+1 610-651-4200
Emergency Contacts
Zeolyst
+1 610-651-4200
Chem Trec
+1 800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Regulation (EC) No. 1272/2008 (CLP)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zeolite EC: 215-283-8 | 1318-02-1 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove patient from exposure, keep warm and at rest.
Symptoms: May cause irritation to the respiratory system.
Wash affected skin with plenty of water. Continue to wash the affected area for at least 15 minutes.
Symptoms: May cause irritation to skin.
Immediately wash out with plenty of water for at least 15 minutes.
Symptoms: May cause irritation to eyes.
Wash out mouth with water.
Immediate Medical Attention
If symptoms develop, obtain medical attention. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Select extinguishing agent appropriate to other materials involved. Normal extinguishing media.
None known.
Not applicable. Inorganic powder or granules.
Firefighter Protection
Chemical goggles (EN 166). Wear suitable protective clothing. Impervious gloves and boots.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear suitable protective clothing. Wear eye/face protection. An approved dust mask should be worn if dust is generated during handling.
Use appropriate container to avoid environmental contamination.
Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal.
Related Products
Similar products with comparable safety profiles
Loaded Zeolite
---
Zeolite
CAS: 1318-02-1
BONDERITE M-ZN 958 R Q3 IBC1709KG ZINC PHOSPHATE
---
BONDERITE M-ZN CD-3020 R L
---
BONDERITE M-ZN CD-3020 R2 L DR254KG
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-MN LT-10 R V MANGANESE PHOSPHATE
---
BONDERITE C-IC 4450 BZU0002
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid generation of dust. Avoid contact with skin and eyes. Wash thoroughly after handling. Do not eat, drink or smoke at the work place. Wear protective equipment to comply with good occupational hygiene practice.
Keep container tightly closed and dry. Store in a cool/low-temperature, well-ventilated (dry) place.
Wash thoroughly after handling. Do not eat, drink or smoke at the work place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, including appropriate local extraction if dusts, fumes or vapours are likely to be evolved. Engineering methods to prevent or control exposure are preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process conditions.
Plastic or rubber gloves. For example EN374-3.
Safety spectacles. Goggles.
Avoid inhalation of dusts. Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded.
Wear suitable protective clothing. Wear suitable overalls.
Local exhaust recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
Contact with water generates heat
Contact with water generates heat
Contact with water generates heat
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CBV10A ZEOLITE Na-MORDENITE POWDER known by?
CBV10A ZEOLITE Na-MORDENITE POWDER is also known as: Zeolite H-Mordenite Powder
What is the hazard signal word for CBV10A ZEOLITE Na-MORDENITE POWDER?
The signal word is no signal word.
What is the physical form of CBV10A ZEOLITE Na-MORDENITE POWDER?
CBV10A ZEOLITE Na-MORDENITE POWDER is a powder appearing as powder. white. with white. color. It has odourless. odor.
What is CBV10A ZEOLITE Na-MORDENITE POWDER used for?
Catalyst.
What is the melting point of CBV10A ZEOLITE Na-MORDENITE POWDER?
The melting point is > 1000 °C and the boiling point is Not applicable..