Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur
- Product Code
- 106578
Regulatory Identifiers
- CAS Number
- 10101-89-0 Check regulations →
- REACH No.
- 01-2119489800-32-XXXX
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Germany
+49 6151 72-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| tri-sodium phosphate dodecahydrate EC: 231-509-8 | 10101-89-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water. Call in ophthalmologist.
immediately make victim drink water (two glasses at most). Consult a physician.
Symptoms: gastric pain, Vomiting
Immediate Medical Attention
Call in ophthalmologist. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium dihydrogen phosphate monohydrate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 10049-21-5
Sodium dihydrogen phosphate monohydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10049-21-5
di-Sodium hydrogen phosphate heptahydrate for analysis EMSURE® ACS
CAS: 7782-85-6
Sodium acetate trihydrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 6131-90-4
di-Sodium hydrogen phosphate dihydrate for analysis EMSURE®
CAS: 10028-24-7
Sodium thiosulfate pentahydrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 10102-17-7
Ammonium sulfate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Sodium acetate anhydrous for analysis EMSURE® ACS,Reag. Ph Eur
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Dry.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
Safety glasses
required when dusts are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
releases water of crystallisation when heated.
See section 10.3
Violent reactions possible with: Strong acids
no information available
no information available
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
The signal word is warning.
What is the physical form of tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur is a solid with off-white color. It has odourless odor.
What is tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur used for?
Reagent for analysis
What are the hazard statements for tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of tri-Sodium phosphate dodecahydrate for analysis EMSURE® ACS,Reag. Ph Eur?
The melting point is ca. 75 °C Elimination of water of crystallisation and the boiling point is not applicable.