Hydrochloric acid fuming 37% for analysis EMSURE® ACS,ISO,Reag. Ph Eur

After inhalation: fresh air. Call in physician.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Hydrogen chloride gas. Not combustible. Ambient fire may liberate hazardous vapours.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® H+, Merck Art. No. 101595). Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H+, Merck Art. No. 101595)

Observe label precautions.

Tightly closed. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Latex gloves, Minimum layer thickness: 0,6 mm, Break through time: 120 min, Material tested: Lapren® (KCL 706 / Aldrich Z677558, Size M). This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

Recommended Filter type: filter E-(P2). The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

acid-resistant protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature).

Corrosive in contact with metals

Exothermic reaction with: Amines, potassium permanganate, salts of oxyhalogenic acids, semimetallic oxides, semimetallic hydrogen compounds, Aldehydes, vinylmethyl ether. Risk of ignition or formation of inflammable gases or vapours with: Carbides, lithium silicide, Fluorine. Generates dangerous gases or fumes in contact with: Aluminum, hydrides, Formaldehyde, Metals, strong alkalis, Sulfides. Risk of explosion with: Alkali metals, conc. sulfuric acid.

Heating.

Metals, metal alloysGives off hydrogen by reaction with metals.

In the event of fire: see section 5