Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lowenstein-Jensen Medium
- Product Code
- NCM0276, 400000886, 700003632, 700003633
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
[SU3] Industrial uses: Uses of substances as such or in preparations at industrial sites; [PC21] Laboratory chemicals; [PROC15] Use as laboratory reagent; Intended for use in routine analytics, including quality control and monitoring. For in vitro use only.
Manufacturers & Suppliers
Neogen Corporation
manufacturer
620 Lesher Place, Lansing, MI 48912, USA
517-372-9200/800-234-5333
http://www.neogen.com
Emergency Contacts
Medical
1-800-498-5743
24 hours
Medical
1-651-523-0318
24 hours
Spill/CHEMTREC
1-800-424-9300
24 hours
Spill/CHEMTREC
1-703-527-3887
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air. If breathing is difficult give oxygen. If breathing stops, provide artificial respiration. Seek medical attention if irritation or symptoms persist.
Symptoms: May cause irritation to respiratory system.
Remove contaminated clothing. Wash with soap and water. Seek medical attention if irritation or symptoms persist.
Symptoms: May cause irritation to skin.
Rinse immediately with plenty of water. Contact lenses should be removed. Seek medical attention if irritation or symptoms persist.
Symptoms: Causes serious eye irritation.
Do not induce vomiting unless told to do so by the poison control center or doctor. Rinse mouth thoroughly. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Symptoms: May damage fertility or the unborn child . Ingestion may cause nausea and vomiting. May cause oral mucosal irritation.
Immediate Medical Attention
Transfer to hospital if there are burns or symptoms of poisoning. Seek medical attention if irritation or symptoms persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate to the surrounding fire conditions.
Combustible dusts: May form combustible dust concentrations in air. Avoid formation of dust.
Do not breathe dust or vapour.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid formation of dust. Ensure adequate ventilation of the working area. Avoid prolonged or repeated exposure.
Prevent further spillage if safe. Clean spillage area thoroughly with plenty of water.
Clean spillage area thoroughly with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Adopt best Manual Handling considerations when handling, carrying and dispensing. Avoid contact with eyes. Use as appropriate: Protective clothing. Read the entire label and follow all use directions, restrictions, and precautions.
Store at temperatures between 2 °C and 30 °C. Follow label instructions. Store in correctly labelled containers. Keep container tightly closed. Protect from moisture. Do not contaminate water, food, or feed by storage or disposal.
Do not eat, drink or smoke in areas where this product is used or stored.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation of the working area.
Use as appropriate: Chemical-resistant gloves made of any waterproof material. Wash the outside of gloves before removing them.
Use as appropriate: Suitable eye protection.
In case of insufficient ventilation, wear suitable respiratory equipment. Dust may be irritating if inhaled.
Use as appropriate: Protective clothing. Wash contaminated clothing, separately from other laundry, with detergent and water before reuse.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.
Avoid sparks, flames, heat and sources of ignition. Avoid formation of dust. Keep away from extreme temperatures. Protect from moisture. Protect from sunlight.
Combustible materials.
Carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lowenstein-Jensen Medium?
The signal word is warning.
What is the physical form of Lowenstein-Jensen Medium?
Lowenstein-Jensen Medium is a solid appearing as powder with light green color. It has characteristic odor.
What is the solubility of Lowenstein-Jensen Medium?
Soluble in water
What is Lowenstein-Jensen Medium used for?
[SU3] Industrial uses: Uses of substances as such or in preparations at industrial sites; [PC21] Laboratory chemicals; [PROC15] Use as laboratory reagent; Intended for use in routine analytics, including quality control and monitoring. For in vitro use only.
What are the hazard statements for Lowenstein-Jensen Medium?
This substance has 3 hazard statements:
- H319: Causes serious eye irritation.
- H361: Suspected of damaging fertility or the unborn child .
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Lowenstein-Jensen Medium?
The melting point is No data available and the boiling point is No data available.