Trichloroacetic acid for analysis EMSURE® ACS,Reag, Ph Eur

fresh air. Call in physician.

Symptoms: Cough, Shortness of breath

wash off with plenty of water. Immediately remove contaminated clothing. If available swab with polyethylene glycol 400. Call a physician immediately.

rinse out with plenty of water. Immediately call in ophthalmologist.

Symptoms: Risk of blindness!

make victim drink water (two glasses at most). Call a physician immediately.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Avoid substance contact. Ensure adequate ventilation. Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Take up dry. Clean up affected area.

Observe label precautions.

Tightly closed. Dry.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when dusts are generated. Empfohlener Filtertyp: Filter B (acc. to DIN 3181) for inorganic gases and vapours. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Acid-resistant protective clothing

Do not let product enter drains.

hygroscopic

See section 10.3

Exothermic reaction with: alkalines, alkali hydroxides, Amines, Strong oxidizing agents, sulfoxides, dimethyl sulfoxide, with, Copper

Strong heating (decomposition).

no information available

in the event of fire: See section 5.