Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL
- Product Code
- 0601049F
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
FOREVER PRODUCTS N.V.
manufacturer
122 rue de la Glacerie, 6180, COURCELLES, Belgique
071/46.85.15
http://www.forever-products.be
Emergency Contacts
Antigifcentrum België, centre anti-poison
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PROPAN-2-OL EC: 200-661-7 | 67-63-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air
Remove soaked clothing and wash skin thoroughly with water.
Wash with plenty of clean, fresh water for several minutes.
Rinse mouth with water.
Immediate Medical Attention
If irritation persists, consult a Ophthalmology. If irritation appears or if the contamination is extensive and prolonged, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sprayed water or water mist, carbon dioxide (CO2), powder
water jet
pressurised containers may burst
Keep packages near the fire cool, to prevent pressurised containers from bursting.
Firefighter Protection
Wear self contained breathing apparatus. Cool containers / holding tank with water spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling. Ensure that there is adequate ventilation, especially in confined areas. Observe precautions stated on label and also industrial safety regulations.
Keep container closed in a dry and well ventilated. Keep away from sources of ignition and heat. To preserve safe from the light. Keep out of reach of children. Keep the container tightly closed in a dry, well-ventilated place. Keep away from all sources of ignition - do not smoke.
Always wash hands after handling. No smoking, eating or drinking in areas where the substance is used.
Do not use tools which may produce sparks. Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended : - Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)) - PVC (polyvinyl chloride) - Butyl Rubber (Isobutylene-isoprene copolymer)
Avoid contact with eyes. Before handling, wear safety goggles with protective sides accordance with standard EN166.
Avoid inhaling vapors. Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 : - A1 (Brown) -A
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This substance is stable under the recommended handling and storage conditions in section 7.
See the sections below.
Possible formation of peroxides.
Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid : - accumulation of electrostatic charges. - heating - heat - flames and hot surfaces
alkali metals, alkaline earth metals, acids, oxidising agents
carbon monoxide (CO), carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Shipping Name
- ISOPROPANOL (ISOPROPYL ALCOHOL)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL?
The signal word is danger.
What is the physical form of ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL?
ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL is a fluid liquid. with colorless color.
What are the hazard statements for ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ALCOOL ISOPROPYLIQUE / ISOPROPYLALCOHOL / ISOPROPYLALKOHOL?
The melting point is -89 °C. and the boiling point is 82 °C..