Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL
- Product Code
- 060105072F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
solvent
Manufacturers & Suppliers
FOREVER PRODUCTS N.V.
manufacturer
122 rue de la Glacerie, 6180, COURCELLES, Belgique
071/46.85.15
http://www.forever-products.be
Emergency Contacts
Antigifcentrum België, centre anti-poison
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| METHANOL EC: 200-659-6 | 67-56-1 | 50 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air
Remove any soiled or splashed clothing immediately. Wash skin with water and soap and rinse thoroughly.
Wash with plenty of clean, fresh water for several minutes.
To call upon a doctor immediately. Optionally administering a solution of sodium chloride (2-3 tablespoons in 500 mL water).
Immediate Medical Attention
To consult a doctor by showing him the label of the product. If irritation persists, consult a Ophthalmology. To call upon a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, water jet, powder
sprayed water or water mist
Combustion gases of a fire to be classed as respiratory poison.
Cool containers / holding tank with water spray.
Firefighter Protection
are to be equipped with self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Prevent any material from entering drains or waterways.
Collect liquid with absorbent material sand, diatomite, binders, universal binders, sawdust, ...
Materials: sand, diatomite, binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No data available.
Store in original packaging and properly closed. Keep out of reach of children.
No smoking, eating or drinking in areas where the substance is used.
Avoid accumulation of electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Type of gloves recommended : PVC (polyvinyl chloride), Butyl Rubber (Isobutylene-isoprene copolymer)
Before handling, wear safety goggles in accordance with standard EN166. Wear goggles tight.
In case of longer exposure, wear a breathing apparatus independent of the ambient air. Filter recommended: P3.
Clothing fireproof and antistatic protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This substance is stable under the recommended handling and storage conditions in section 7.
See the sections below.
Formation of explosive gas mixture with air.
accumulation of electrostatic charges, flames and hot surfaces, contact with air
oxidising agents
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1230
- Shipping Name
- METHANOL
- Transport Class
- 3+6.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL?
The signal word is danger.
What is the physical form of ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL?
ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL is a fluid liquid. with unspecified color.
What is ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL used for?
solvent
What are the hazard statements for ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H301: Toxic if swallowed.
- H311: Toxic in contact with skin.
- H331: Toxic if inhaled.
- H370: Causes damage to organs (if inhaled, if swallowed, in contact with skin).
What is the melting point of ALCOOL METHYLIQUE/METHANOL/METHYLALKOHOL?
The melting point is -97 °C. and the boiling point is 64 °C..