Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Mida FLOW 119 DM
- Product Form
- Mixture
- Product Code
- 653
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use, Alkaline CIP detergent
Uses advised against
The product should not be used for purposes other than those shown above without first referring to the supplier and obtaining written handling instructions
Manufacturers & Suppliers
Christeyns NV
manufacturer
Afrikalaan 182, 9000 GENT, Belgium
+32 (0)9/ 223 38 71
http://www.christeyns.com
Christeyns UK Ltd.
distributor
Rutland Street, GB– Bradford BD4 7EA, United Kingdom
+44 (0)1274 39 32 86
http://www.christeyns.com
Christeyns Food Hygiene Ltd. Ltd
distributor
2, Cameron Court, Winwick Quay, GB– WA2 8RE Warrington – Cheshire, United Kingdom
+44(0)1925 234696
http://www.christeyns.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Take victim to fresh air, in a quiet place and if necessary take medical advice.
Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.
Take off immediately all contaminated clothing. Wash off immediately with plenty of water. In case of faintness or symptoms of skin irritation appear, take medical advice.
Symptoms: Burns upon contact with the skin.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Symptoms: Corrosive to eyes.
Rinse mouth out with water. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor.
Symptoms: Burns of the upper digestive and respiratory tracts.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing agents can be used.
Explosion hazard : Not applicable.
Firefighter Protection
Use self-contained breathing apparatus and chemically protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Absorb spilled material with sand or earth. Shovel or sweep up and put in a closed container for disposal.
Materials: sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. After use, container has to be completely emptied and closed. Never return unused material to original container.
Keep only in original container. Keep out of frost.
Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant PVC gloves (to European standard EN 374 or equivalent)
Safety glasses with side-shields (EN 166)
Ensure good ventilation
Wear suitable protective clothing minimum (EN 13034) Type 6 equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
None under normal use.
Humid air.
Never mix with other materials.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3266
- Shipping Name
- CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S.
- Transport Class
- 8
- Packing Group
- II
274
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Mida FLOW 119 DM?
The signal word is danger.
What is the physical form of Mida FLOW 119 DM?
Mida FLOW 119 DM is a liquid with light yellow. clear. color. It has characteristic. odor.
What is the solubility of Mida FLOW 119 DM?
Not available
What is Mida FLOW 119 DM used for?
Professional use, Alkaline CIP detergent
What are the hazard statements for Mida FLOW 119 DM?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Mida FLOW 119 DM?
The melting point is Not available and the boiling point is ≥ 100 °C.