FreeFlow 8 III

Provide fresh air. If experiencing respiratory symptoms: Call a doctor.

Rinse immediately contaminated clothing and skin with plenty of water before removing clothes. Wash contaminated clothing before reuse. After contact with skin, wash immediately with plenty of water and soap.

Symptoms: corrosive injuries

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist.

Symptoms: Causes serious eye damage.

Do NOT induce vomiting. Rinse mouth immediately and drink 1 glass of of water. Call a physician immediately. Never give anything by mouth to an unconscious person or a person with cramps.

Symptoms: If swallowed danger of perforation of the esophagus and the stomach (strong corrosive effects).

Carbon dioxide (CO2), Foam, Extinguishing powder, Water spray jet

Full water jet

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2), Pyrolysis products, toxic, Sulphur oxides

Use water spray jet to protect personnel and to cool endangered containers.

Do not get in eyes, on skin, or on clothing. Remove persons to safety. Use personal protection equipment. Provide adequate ventilation. emergency eye wash. Do not breathe gas/fumes/vapour/spray.

Do not allow to enter into surface water or drains. Make sure spills can be contained, e.g. in sump pallets or kerbed areas. Do not allow to enter into soil/subsoil.

Clear contaminated areas thoroughly.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Do not breathe dust/fume/gas/mist/vapours/spray. Use personal protective equipment as required. Always close containers tightly after the removal of product. Avoid contact with eyes and skin. When diluting/dissolving, always have the water ready first, then slowly stir in the product.

Ensure adequate ventilation of the storage area.

When using do not eat, drink, smoke, sniff. Wash hands and face before breaks and after work and take a shower if necessary. Apply skin care products after work. Wash contaminated clothing prior to re-use. Only wear fitting, comfortable and clean protective clothing.

Technical measures and the use of suitable work processes have priority over the use of personal protective equipment. Provide adequate ventilation as well as local exhaustion at critical locations.

Tested protective gloves must be worn Wear suitable gloves tested to EN374. Recommended material: NBR (Nitrile rubber) Thickness of the glove material 0,4 mm NR (natural rubber, natural latex) Thickness of the glove material 0,12 mm Observe the manufacturer's information on permeability and breakthrough times as well as the special conditions at the workplace (mechanical stress, contact duration).

Tightly fitting protective goggles.

Respiratory protection necessary at: aerosol or mist formation .

Recommended protective clothing articles lab coat Overall

Do not allow to enter into surface water or drains. Prevent aerosol formation or splashes.

The product is chemically stable under recommended conditions of storage, use and temperature.

Acid

No hazardous reaction when handled and stored according to provisions. Thermal decomposition can lead to the escape of irritating gases and vapours.

Heat UV-radiation/sunlight Frost Do not expose to a temperature above 30 °C.

Oxidizing agent Reducing agent strong base

Decomposition products in case of fire: see section 5.