NextSDS Logo
Safety Data Sheet EN

Floreal Fresh

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Floreal Fresh

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Interior cleaner for professional use

Manufacturers & Suppliers

Greenspeed logo

Greenspeed

P.O.Box 1250, 2280 CG Rijswijk (ZH), NL

+31703458737

http://www.greenspeed.eu/

Emergency Contacts

Emergency Contact

+31 70 345 87 37

Emergency Contact

+353 1 809 2166

Emergency Contact

+31 30 274 88 88

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
EUH208 EUH208

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
alcohols, C10-16, ethoxylated, propoxylated 69227-22-1 5 - 15% Yes
D-Glucopyranose, C10-16(even numbered)-alkyl glycosides EC: 600-975-8 110615-47-9 5% Yes
C8-10 D-glucoside EC: 500-220-1 68515-73-1 5% Yes
Sodiumlaurylsulphate EC: 287-809-4 85586-07-8 5% Yes
alpha-Pinene EC: 232-077-3 7785-26-4 5% Yes
1,8-Cineole EC: 207-431-5 470-82-6 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

let sit upright, fresh air, rest and take to hospital.

Skin contact

remove contaminated clothing, rinse skin with plenty of water and immediately transport to hospital.

Eye contact

first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: redness, pain, bad looking

Ingestion

rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: diarrhoea, headache, abdominal cramps, sleepiness, vomiting

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

do not allow to flow into sewers or open water.

Cleanup methods

remove by using absorbent material

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

handle with care to avoid spillage.

Storage

keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If necessary, use with sufficient exhaust ventilation.

Hands

handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Eyes

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

Skin/Body

impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Odor Threshold
not applicable
Solidification Point
---
Upper Explosive Limit
/
Crystallisation Point
---
Molecular Weight
---
Relative Evaporation Rate
---
Softening Point
---
Physical State Data
liquid
Kinematic Viscosity
1 mm²/s
Physical State
liquid
Solubility In Fat
---
State Under Standard Conditions
---
Melting Point
0 °C
Appearance
liquid
Flammability
not applicable
Relative Density
1.0150 kg/l
Partition Coefficient
not applicable
Odor
characteristic
Boiling Point
100 °C — 199 °C
Ph
8.0
Flash Point
/
Vapor Density
not applicable
Explosive Limits
---
Density
---
Voc Content
10.000 g/l
Vapor Pressure
2 332 Pa
Form
---
Solubility
---
Colour
---
Dynamic Viscosity
1 mPa.s
Evaporation Rate
0.300
Solubility In Water
not soluble
Freezing Point
---
Lower Explosive Limit
/
Auto Ignition Temperature
/
Bulk Density
---
Decomposition Temperature
/
Cloud Point
---
Properties Status
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

extremely high or low temperatures.

Reactivity

stable under normal conditions.

Avoid

protect from sunlight and do not expose to temperatures exceeding + 50°C.

Incompatible

acids, alkalines, oxidants, reductants

Decomposition

doesn't decompose with normal use

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Floreal Fresh?

The signal word is warning.

What is the physical form of Floreal Fresh?

Floreal Fresh is a liquid appearing as liquid . It has characteristic odor.

What is Floreal Fresh used for?

Interior cleaner for professional use

What are the hazard statements for Floreal Fresh?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of Floreal Fresh?

The melting point is 0 °C and the boiling point is 100 °C — 199 °C.