NextSDS Logo
Safety Data Sheet EN

Alu Cleaner

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Alu Cleaner

Regulatory Identifiers

CAS Number
N/A

Identified Uses

/

Manufacturers & Suppliers

BOMA logo

BOMA

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

Emergency Contacts

Emergency Contact

003270245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1B H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P234 Keep only in original container.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Phosphoric acid EC: 231-633-2 7664-38-2 15 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

let sit upright, fresh air, rest and take to hospital.

Symptoms: headache, dizziness, nausea, drowsiness, unconsciousness

Skin contact

remove contaminated clothing, rinse skin with plenty of water and immediately transport to hospital.

Symptoms: caustic, redness, pain, serious burns

Eye contact

first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: caustic, redness, bad looking, pain

Ingestion

rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: caustic, lack of breath, vomiting, blisters on lips and tongue, burning pain in mouth and throat, gullet and stomach

Immediate Medical Attention

Always ask medical advice as soon as possible should serious or continuous disturbances occur. Immediately transport to hospital for skin, ingestion, and inhalation exposure. Take to physician for eye contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

handle with care to avoid spillage.

Storage

keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

use with sufficient exhaust ventilation.

Hands

handling with Viton-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,7 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Eyes

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

If necessary, use an air-purifying face mask in case of respiratory hazards. Use the ABEK type as protection against these troublesome levels.

Skin/Body

impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Properties Status
---
Density
---
Melting Point
0 °C
Relative Evaporation Rate
---
Form
---
Boiling Point
100 °C
Partition Coefficient
not applicable
Metal Corrosion
---
Cloud Point
---
Physical State
liquid
Voc Content
0.000 g/l
Solubility In Water
completely soluble
Vapor Pressure
/
Physical State Data
liquid
Odor Threshold
not applicable
Vapor Density
not applicable
Flash Point
/
Colour
---
Softening Point
---
Odor
characteristic
Molecular Weight
---
State Under Standard Conditions
---
Solidification Point
---
Relative Density
1.093 kg/l
Colour Intensity
---
Solubility In Fat
---
Ph
1.2
Decomposition Temperature
/
Solubility
---
Crystallisation Point
---
Freezing Point
---
Appearance
liquid
Kinematic Viscosity
1 mm²/s
Lower Explosive Limit
/
Flammability
not applicable
Bulk Density
---
Dynamic Viscosity
1 mPa.s
Auto Ignition Temperature
/
Evaporation Rate
0.300
Upper Explosive Limit
/
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

extremely high or low temperatures.

Reactivity

stable under normal conditions.

Avoid

protect from sunlight and do not expose to temperatures exceeding + 50°C.

Incompatible

oxidants, alkalines

Decomposition

doesn't decompose with normal use

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
Phosphoric acid solution
Transport Class
8
Packing Group
II
ADR

Hazard characteristics: Risk of burns. Risk to the aquatic environment and the sewerage system. Additional guidance: Prevent leaking substances from running into the aquatic environment or the sewage system.

IMDG

Hazard characteristics: Risk of burns. Risk to the aquatic environment and the sewerage system. Additional guidance: Prevent leaking substances from running into the aquatic environment or the sewage system.

IATA

Hazard characteristics: Risk of burns. Risk to the aquatic environment and the sewerage system. Additional guidance: Prevent leaking substances from running into the aquatic environment or the sewage system.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Alu Cleaner?

The signal word is danger.

What is the physical form of Alu Cleaner?

Alu Cleaner is a liquid appearing as liquid . It has characteristic odor.

What is Alu Cleaner used for?

/

What are the hazard statements for Alu Cleaner?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Alu Cleaner?

The melting point is 0 °C and the boiling point is 100 °C.