NextSDS Logo
Safety Data Sheet EN

Alu-Devil Special (Wheel Cleaner)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Alu-Devil Special (Wheel Cleaner)

Regulatory Identifiers

CAS Number
N/A
UFI Code
SFXW-T890-D009-N3NT

Identified Uses

Cleaning agent / Cleaner

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

T

Tuga Chemie GmbH

manufacturer

Nordstr. 3, D-49086 Osnabrück

0541/27403

Emergency Contacts

Poison Information Center Mainz

+49 (0) 6131 19240

24h

DE, EN

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.

Precautionary Statements

P260 Do not breathe mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P330 Rinse mouth.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of the substances listed below with harmless additions (aqueous solution).

Chemical Name CAS Number Concentration Hazardous
sodium mercaptoacetate EC: 206-696-4 367-51-1 5 - 10% Yes
Alcohols, C12-14, ethoxylated, sulfates, sodium salts EC: 500-234-8 68891-38-3 2.5% Yes

Regulation (EC) No 648/2004 on detergents / Labelling for contents: anionic surfactants, perfumes, non-ionic surfactants <5%

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of symptoms.

Skin contact

Wash skin with water using soap if available. If persistent irritation occurs, obtain medical attention.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.

Ingestion

Rinse out mouth and then drink plenty of water. Do not induce vomiting; instantly call for medical help.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder, water jet or alcohol-resistant foam. Use fire fighting measures that suit the environment.

Unsuitable media

Water with a full water jet.

Specific hazards

Thermal decomposition can lead to release of irritating gases and vapours. Do not inhale explosion and combustion gases.

Instructions

Endangered containers in the surrounding area should be cooled with a water-hose.

Firefighter Protection

Wear full protective suit with self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment and keep unprotected persons away. Avoid contact with skin, eyes and clothes.

Environmental

Dilute with much water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes and skin.

Storage

Keep containers tightly closed. Store in cool, dry conditions. Keep container tightly sealed. Protect from frost.

Fire prevention

Pay attention to general rules of internal fire prevention.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR

Eyes

Tightly sealed safety glasses.

Respiratory

Not necessary if room is well-ventilated.

Skin/Body

Standard protective clothing. Chemical resistant safety-shoes or boots. If skin contact is possible, wear impenetrable protective clothing against this solvent.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Freezing Point
Not determined
Physical State Data
liquid
Relative Density
Not determined.
Ph
7-8
Flash Point
Product is non-flammable nor potentially explosive
Partition Coefficient
Not determined.
Crystallisation Point
---
Auto Ignition Temperature
Product is not selfigniting.
Relative Evaporation Rate
---
Solubility In Fat
---
Molecular Weight
---
Kinematic Viscosity
Not determined.
Evaporation Rate
Not determined.
Density
1.06 g/cm³
Melting Point
Not determined
Metal Corrosion
---
Voc Content
---
Flammability
Not applicable.
Dynamic Viscosity
Not determined.
Decomposition Temperature
Not determined.
Solidification Point
---
Colour Intensity
---
Upper Explosive Limit
Not determined.
Cloud Point
---
Softening Point
---
Appearance
Fluid
Odor
perfumed
Odor Threshold
Not determined.
State Under Standard Conditions
---
Colour
Green
Explosive Limits
---
Physical State
Fluid
Boiling Point
100 °C
Properties Status
---
Solubility In Water
Fully miscible
Vapor Density
Not determined.
Lower Explosive Limit
Not determined.
Vapor Pressure
23 hPa
Solubility
---
Form
Fluid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known

Avoid

No further relevant information available.

Incompatible

strong oxidizing agents, Strong acids

Decomposition

Thermal decomposition can produce a variety of compounds, the precise nature of which will depend on the decomposition conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The following advice is related to new material and not to any processed products. In case of a mixture with other products other disposal methods may become necessary. If in doubt seek advice from product supplier or from local authorities.

Disposal

Must not be disposed of together with household garbage. Do not allow product to reach sewage system.

Waste Codes

The valid waste code number of the application can be obtained from the European waste catalogue. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Void
Shipping Name
Void
Transport Class
Void
Packing Group
Void
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Employment restrictions concerning young persons must be observed.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Alu-Devil Special (Wheel Cleaner)?

The signal word is warning.

What is the physical form of Alu-Devil Special (Wheel Cleaner)?

Alu-Devil Special (Wheel Cleaner) is a fluid appearing as fluid with green color. It has perfumed odor.

What is Alu-Devil Special (Wheel Cleaner) used for?

Cleaning agent / Cleaner

What are the hazard statements for Alu-Devil Special (Wheel Cleaner)?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H317: May cause an allergic skin reaction.

What is the melting point of Alu-Devil Special (Wheel Cleaner)?

The melting point is Not determined and the boiling point is 100 °C.