NextSDS Logo
Safety Data Sheet EN

Arcair Protex Alclean Aluminum Cleaner

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Arcair Protex Alclean Aluminum Cleaner
Product Code
AR781B

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning and removal of grease, oil, dirt and white, chalky aluminum oxides before welding. Removes weld residue and discoloration after welding.

Manufacturers & Suppliers

T

Thermadyne Tweco

distributor

Wichita, KS 67277

D

Dynaflux, Inc.

manufacturer

241 Brown Farm Rd. Cartersville, GA 30120 U.S.A.

Emergency Contacts

CHEM-TEL

800-255-3924

CHEM-TEL

813-248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3
Skin Corr. Cat. 1B
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

Hazard Statements

H290 May be corrosive to metals.
H301 Toxic if swallowed
H311 Toxic in contact with skin
H314 Causes skin burns and eye damage.
H331 Toxic if inhaled

Precautionary Statements

P260 Do not breathe fume/mist/vapors/spray.
P264 Wash face, hands and any exposed skin thoroughly after handling.
P271 Use on a well-ventilated area.
P280 Wear protective gloves/protection clothing/eye protection/face protection.
P303 + P361 + P353 IF ON SKIN (hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call doctor/physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present. Continue rinsing. Call poison center or doctor/physician.
P310 Immediately call poison center or doctor/physician
P403 + P233 Store in a well-ventilated environment. Keep container tightly closed.
P501 Dispose of contents/container according to State, Federal and Providential regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Phosphoric Acid --- 5% No
Ammonium Biflouride 1341-49-7 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call doctor/physician.

Symptoms: Inhalation causes irritation and burning to nose and throat.

Skin contact

IF ON SKIN (hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.

Symptoms: Causes skin burns.

Eye contact

Hold eyelids apart, initiate and maintain gentle and continuous irrigation for 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call poison center or doctor/physician.

Symptoms: Causes eye damage.

Ingestion

IF SWALLOWED: rinse mouth. DO NOT INDUCE VOMITING. Immediately call poison center or doctor/physician.

Symptoms: Ingestion may cause severe burns to mouth, throat or stomach.

Immediate Medical Attention

Immediately call poison center or doctor/physician.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Specific hazards

Material is corrosive.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Approach suspected leak areas with caution.

Environmental

Prevent from entering into soil, ditches, sewers, waterways and/or groundwater.

Cleanup methods

Contain and collect spillage with non-combustible absorbent material, place in labeled container for disposal, neutralize with a dilute solution of sodium carbonate.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite), dilute solution of sodium carbonate

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Use personal protection recommended in Section 8. Avoid contact with skin, eyes or clothing. Follow all product label instructions. Use only as directed. Do not breathe dust/fume/mist/vapors/spray. Keep out of the reach of children.

Storage

Store in a well-ventilated environment. Store in a cool, dry place, out of direct sunlight. Do not freeze, less than or equal to 32°F or heat above 110°F. Keep container tightly closed.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Wash face, hands and any exposed skin thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Apply technical measures to comply with the occupational exposure limits. Eyewash stations. Showers.

Hands

Chemical resistant, impermeable gloves.

Eyes

Chemical anti-splash safety goggles.

Respiratory

Ensure adequate ventilation, especially in confined areas. Ventilate by opening all doors and windows. If exposure above the TLV or EL require a NIOSH approved respirator equipped for the exposure or suitable respiratory protection per 29 CFR 1910.134 is required.

Skin/Body

Wear appropriate chemical resistant clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Yellow liquid
Colour
Amber
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
212°F
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
1 (Water=1)
Vapor Pressure
---
Vapor Density
---
Relative Density
1.079
Bulk Density
---
Density
---
Flammability
Nonflammable
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Complete
Solubility In Fat
---
Molecular Weight
---
Voc Content
1%
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not reactive under normal conditions.

Avoid

Keep out of reach of children

Incompatible

Strong oxidizers.

Decomposition

Carbon monoxide, Carbon dioxide (CO2)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed of together with general refuse.

Disposal

Dispose of container and unused contents in accordance with federal, state and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
NA1760
Shipping Name
Compounds, cleaning liquid (Phosphoric acid)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Arcair Protex Alclean Aluminum Cleaner?

The signal word is danger.

What is the physical form of Arcair Protex Alclean Aluminum Cleaner?

Arcair Protex Alclean Aluminum Cleaner is a liquid appearing as yellow liquid with amber color.

What is Arcair Protex Alclean Aluminum Cleaner used for?

Cleaning and removal of grease, oil, dirt and white, chalky aluminum oxides before welding. Removes weld residue and discoloration after welding.

What are the hazard statements for Arcair Protex Alclean Aluminum Cleaner?

This substance has 5 hazard statements:

  • H290: May be corrosive to metals.
  • H301: Toxic if swallowed
  • H311: Toxic in contact with skin
  • H314: Causes skin burns and eye damage.
  • H331: Toxic if inhaled