Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RM 41
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Maintenance product
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Alfred Kärcher SE & Co. KG
manufacturer
Alfred-Kärcher-Str. 28-40, D - 71364 Winnenden
+49-7195-14-0
http://www.karcher.com
Alfred Kärcher SE & Co. KG (Department PCD-D)
manufacturer
+49-7195-14-2548
Emergency Contacts
CHEMTREC
1-800-424-9300
Day or Night
CHEMTREC
+1 703-741-5970
Day or Night
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with non-hazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bis(2-hydroxyethyl)oleylamine | 25307-17-9 | 2.5 - 5% | Yes |
| N-Alkyl-N,N-dimethyl-N-benzylammoniumchloride EC: 270-325-2 | 68424-85-1 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse with warm water.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing.
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Avoid contact with eyes and skin.
Keep receptacle tightly sealed.
Avoid contact with eyes and skin.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not required. Material of gloves Butyl rubber, BR. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles (EN 166)
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Not necessary if room is well-ventilated.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Bis(2-hydroxyethyl)oleylamine)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RM 41?
The signal word is danger.
What is the physical form of RM 41?
RM 41 is a liquid appearing as form: fluid colour: light brown with light brown color. It has pine odor.
What is RM 41 used for?
Maintenance product
What are the hazard statements for RM 41?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of RM 41?
The melting point is 0 °C and the boiling point is 100 °C.